lkml.org 
[lkml]   [2020]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts file
On Mon, Jul 06, 2020 at 04:44:41PM +0800, Richard Zhu wrote:
> Since iMX6Q/DL PCIe has the PM limitation (ERR005723 "PCIe PCIe does
> not support L2 Power Down").
> System suspend/resume would be broken by PCIe, if PCIe is enabled.
> Only enable PCIe in the xxx-pcie.dts files to avoid the brokens when
> other xxx.dtb files are used on sabresd and sabreauto boards.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
> arch/arm/boot/dts/Makefile | 4 ++++
> arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6dl-sabresd-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6q-sabreauto-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6q-sabresd-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 4 ----
> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 -
> 7 files changed, 52 insertions(+), 5 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts
> create mode 100644 arch/arm/boot/dts/imx6dl-sabresd-pcie.dts
> create mode 100644 arch/arm/boot/dts/imx6q-sabreauto-pcie.dts
> create mode 100644 arch/arm/boot/dts/imx6q-sabresd-pcie.dts

No. There are hundreds of boards based on i.MX6Q/DL. We are not going
to maintain a -pcie.dts for every single one of them.

Shawn

\
 
 \ /
  Last update: 2020-07-13 08:49    [W:0.055 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site