lkml.org 
[lkml]   [2020]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3] scsi: ufs: Cleanup completed request without interrupt notification
Date


>
> Hi Avri,
>
> On Thu, 2020-07-09 at 08:31 +0000, Avri Altman wrote:
> > >
> > > If somehow no interrupt notification is raised for a completed request
> > > and its doorbell bit is cleared by host, UFS driver needs to cleanup
> > > its outstanding bit in ufshcd_abort().
> > Theoretically, this case is already accounted for -
> > See line 6407: a proper error is issued and eventually outstanding req is
> cleared.
> >
> > Can you go over the scenario you are attending line by line,
> > And explain why ufshcd_abort does not account for it?
>
> Sure.
>
> If a request using tag N is completed by UFS device without interrupt
> notification till timeout happens, ufshcd_abort() will be invoked.
>
> Since request completion flow is not executed, current status may be
>
> - Tag N in hba->outstanding_reqs is set
> - Tag N in doorbell register is not set
>
> In this case, ufshcd_abort() flow would be
>
> - This log is printed: "ufshcd_abort: cmd was completed, but without a
> notifying intr, tag = N"
> - This log is printed: "ufshcd_abort: Device abort task at tag N"
> - If hba->req_abort_skip is zero, QUERY_TASK command is sent
> - Device responds "UPIU_TASK_MANAGEMENT_FUNC_COMPL"
> - This log is printed: "ufshcd_abort: cmd at tag N not pending in the
> device."
> - Doorbell tells that tag N is not set, so the driver goes to label
> "out" with this log printed: "ufshcd_abort: cmd at tag %d successfully
> cleared from DB."
> - In label "out" section, no cleanup will be made, and then ufshcd_abort
> exits
> - This request will be re-queued to request queue by SCSI timeout
> handler
>
> Now, Inconsistent state shows-up: A request is "re-queued" but its
> corresponding resource in UFS layer is not cleared, below flow will
> trigger bad things,
>
> - A new request with tag M is finished
> - Interrupt is raised and ufshcd_transfer_req_compl() found both tag N
> and M can process the completion flow
> - The post-processing flow for tag N will be executed while its request
> is still alive
>
> I am sorry that below messages are only for old kernel in non-blk-mq
> case. However above scenario will also trigger bad thing in blk-mq case.

Ok. Thanks.

>
> >
> > >
> > > Otherwise, system may crash by below abnormal flow:
> > >
> > > After this request is requeued by SCSI layer with its
> > > outstanding bit set, the next completed request will trigger
> > > ufshcd_transfer_req_compl() to handle all "completed outstanding
> > > bits". In this time, the "abnormal outstanding bit" will be detected
> > > and the "requeued request" will be chosen to execute request
> > > post-processing flow. This is wrong and blk_finish_request() will
> > > BUG_ON because this request is still "alive".
> > >
> > > It is worth mentioning that before ufshcd_abort() cleans the timed-out
> > > request, driver need to check again if this request is really not
> > > handled by __ufshcd_transfer_req_compl() yet because it may be
> > > possible that the interrupt comes very lately before the cleaning.
> > What do you mean? Why checking the outstanding reqs isn't enough?
> >
> > >
> > > Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
> > > ---
> > > drivers/scsi/ufs/ufshcd.c | 9 +++++++--
> > > 1 file changed, 7 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> > > index 8603b07045a6..f23fb14df9f6 100644
> > > --- a/drivers/scsi/ufs/ufshcd.c
> > > +++ b/drivers/scsi/ufs/ufshcd.c
> > > @@ -6462,7 +6462,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
> > > /* command completed already */
> > > dev_err(hba->dev, "%s: cmd at tag %d successfully cleared
> from
> > > DB.\n",
> > > __func__, tag);
> > > - goto out;
> > > + goto cleanup;
> > But you've arrived here only if (!(test_bit(tag, &hba->outstanding_reqs))) -
> > See line 6400.
> >
> > > } else {
> > > dev_err(hba->dev,
> > > "%s: no response from device. tag = %d, err %d\n",
> > > @@ -6496,9 +6496,14 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
> > > goto out;
> > > }
> > >
> > > +cleanup:
> > > + spin_lock_irqsave(host->host_lock, flags);
> > > + if (!test_bit(tag, &hba->outstanding_reqs)) {
Is this needed? it was already checked in line 6439.

Thanks,
Avri

> > > + spin_unlock_irqrestore(host->host_lock, flags);
> > > + goto out;
> > > + }
> > > scsi_dma_unmap(cmd);
> > >
> > > - spin_lock_irqsave(host->host_lock, flags);
> > > ufshcd_outstanding_req_clear(hba, tag);
> > > hba->lrb[tag].cmd = NULL;
> > > spin_unlock_irqrestore(host->host_lock, flags);
> > > --
> > > 2.18.0

\
 
 \ /
  Last update: 2020-07-12 12:05    [W:0.051 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site