lkml.org 
[lkml]   [2020]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH 1/2] arm64: dts: lx2160a: add dspi controller DT nodes
On Mon, Jun 22, 2020 at 04:31:08PM +0800, Qiang Zhao wrote:
> From: Chuanhua Han <chuanhua.han@nxp.com>
>
> Add the dspi support on lx2160
>
> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
> Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>

When you resend patches, please state why. Should I drop the patches
I just applied and pick up this version instead?

Shawn

> ---
> arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 39 ++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index abaeb58..f56172f 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -777,6 +777,45 @@
> status = "disabled";
> };
>
> + dspi0: spi@2100000 {
> + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x2100000 0x0 0x10000>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 7>;
> + clock-names = "dspi";
> + spi-num-chipselects = <5>;
> + bus-num = <0>;
> + status = "disabled";
> + };
> +
> + dspi1: spi@2110000 {
> + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x2110000 0x0 0x10000>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 7>;
> + clock-names = "dspi";
> + spi-num-chipselects = <5>;
> + bus-num = <1>;
> + status = "disabled";
> + };
> +
> + dspi2: spi@2120000 {
> + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x2120000 0x0 0x10000>;
> + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 7>;
> + clock-names = "dspi";
> + spi-num-chipselects = <5>;
> + bus-num = <2>;
> + status = "disabled";
> + };
> +
> esdhc0: esdhc@2140000 {
> compatible = "fsl,esdhc";
> reg = <0x0 0x2140000 0x0 0x10000>;
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2020-07-11 16:25    [W:0.085 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site