lkml.org 
[lkml]   [2020]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 1/5] dt-bindings: remoteproc: Add Qualcomm PIL info binding
On 2020-06-22 12:19, Bjorn Andersson wrote:
> Add a devicetree binding for the Qualcomm peripheral image loader
> relocation information region found in the IMEM.
>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> Reviewed-by: Vinod Koul <vkoul@kernel.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Changes since v6:
> - None
>
> .../bindings/remoteproc/qcom,pil-info.yaml | 44 +++++++++++++++++++
> 1 file changed, 44 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
>
> diff --git
> a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> new file mode 100644
> index 000000000000..87c52316ddbd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> @@ -0,0 +1,44 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm peripheral image loader relocation info binding
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description:
> + The Qualcomm peripheral image loader relocation memory region, in
> IMEM, is
> + used for communicating remoteproc relocation information to post
> mortem
> + debugging tools.
> +
> +properties:
> + compatible:
> + const: qcom,pil-reloc-info
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +examples:
> + - |
> + imem@146bf000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x146bf000 0x1000>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + ranges = <0 0x146bf000 0x1000>;
> +
> + pil-reloc@94c {
> + compatible = "qcom,pil-reloc-info";
> + reg = <0x94c 0xc8>;
> + };
> + };
> +...
Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>

\
 
 \ /
  Last update: 2020-07-10 18:36    [W:0.088 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site