lkml.org 
[lkml]   [2020]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v9 2/2] PCI: xilinx-cpm: Add Versal CPM Root Port driver
On Tue, Jun 16, 2020 at 6:57 AM Bharat Kumar Gogada
<bharat.kumar.gogada@xilinx.com> wrote:
>
> - Add support for Versal CPM as Root Port.
> - The Versal ACAP devices include CCIX-PCIe Module (CPM). The integrated
> block for CPM along with the integrated bridge can function
> as PCIe Root Port.
> - Bridge error and legacy interrupts in Versal CPM are handled using
> Versal CPM specific interrupt line.
>
> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
> ---
> drivers/pci/controller/Kconfig | 8 +
> drivers/pci/controller/Makefile | 1 +
> drivers/pci/controller/pcie-xilinx-cpm.c | 617 +++++++++++++++++++++++++++++++
> 3 files changed, 626 insertions(+)
> create mode 100644 drivers/pci/controller/pcie-xilinx-cpm.c

[...]

> +static int xilinx_cpm_pcie_probe(struct platform_device *pdev)
> +{
> + struct xilinx_cpm_pcie_port *port;
> + struct device *dev = &pdev->dev;
> + struct pci_host_bridge *bridge;
> + struct resource *bus_range;
> + int err;
> +
> + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*port));
> + if (!bridge)
> + return -ENODEV;
> +
> + port = pci_host_bridge_priv(bridge);
> +
> + port->dev = dev;
> +
> + err = pci_parse_request_of_pci_ranges(dev, &bridge->windows,
> + &bridge->dma_ranges, &bus_range);
> + if (err) {
> + dev_err(dev, "Getting bridge resources failed\n");
> + return err;
> + }
> +
> + err = xilinx_cpm_pcie_init_irq_domain(port);
> + if (err)
> + return err;
> +
> + err = xilinx_cpm_pcie_parse_dt(port, bus_range);
> + if (err) {
> + dev_err(dev, "Parsing DT failed\n");
> + goto err_parse_dt;
> + }
> +
> + xilinx_cpm_pcie_init_port(port);
> +
> + err = xilinx_cpm_setup_irq(port);
> + if (err) {
> + dev_err(dev, "Failed to set up interrupts\n");
> + goto err_setup_irq;
> + }

All the h/w init here can be moved to an .init() function in ecam ops
and then use pci_host_common_probe. Given this is v9, that can be a
follow-up I guess.

Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>

> +
> + bridge->dev.parent = dev;
> + bridge->sysdata = port->cfg;
> + bridge->busnr = port->cfg->busr.start;
> + bridge->ops = &pci_generic_ecam_ops.pci_ops;
> + bridge->map_irq = of_irq_parse_and_map_pci;
> + bridge->swizzle_irq = pci_common_swizzle;
> +
> + err = pci_host_probe(bridge);
> + if (err < 0)
> + goto err_host_bridge;
> +
> + return 0;
> +
> +err_host_bridge:
> + xilinx_cpm_free_interrupts(port);
> +err_setup_irq:
> + pci_ecam_free(port->cfg);
> +err_parse_dt:
> + xilinx_cpm_free_irq_domains(port);
> + return err;
> +}

\
 
 \ /
  Last update: 2020-07-10 17:21    [W:0.166 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site