lkml.org 
[lkml]   [2020]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 9/9] ARM: dts: qcom: msm8974: Add "simple-bus" to our mdss node
Date
As described in the bindings patch, this means that our child nodes
are devices in their own right.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
If this patch lands before the patch ("drm/msm: Avoid manually
populating our children if "simple-bus" is there") it doesn't seem to
be the end of the world. The first time through
add_display_components() it'll notice that the children are already
populated and it will be a no-op. When it gets a defer it will then
depouplate them (even though it didn't populate them) and future calls
will just populate them again.

NOTE: I have no way to test this patch, but I'm assuming it works OK?

arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 51f5f904f9eb..9f84c9fd716c 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1402,7 +1402,7 @@ cnoc: interconnect@fc480000 {
mdss: mdss@fd900000 {
status = "disabled";

- compatible = "qcom,mdss";
+ compatible = "qcom,mdss", "simple-bus";
reg = <0xfd900000 0x100>,
<0xfd924000 0x1000>;
reg-names = "mdss_phys",
--
2.27.0.383.g050319c2ae-goog
\
 
 \ /
  Last update: 2020-07-11 01:04    [W:0.115 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site