lkml.org 
[lkml]   [2020]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/6] drivers: thermal: tsens: load regmap from phandle for 8960
Date
Devices based on 8060 tsens driver (ipq8064) use the reg of the gcc
driver. Permit to load the regmap from a syscon phandle instead of fail
as the reg are already used by another driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/thermal/qcom/tsens-8960.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 2a28a5af209e..890baf1b5542 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -7,6 +7,7 @@
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
#include <linux/thermal.h>
#include "tsens.h"

@@ -168,8 +169,12 @@ static int init_8960(struct tsens_priv *priv)
u32 reg_cntl;

priv->tm_map = dev_get_regmap(priv->dev, NULL);
- if (!priv->tm_map)
- return -ENODEV;
+ if (!priv->tm_map) {
+ priv->tm_map = syscon_regmap_lookup_by_phandle(
+ priv->dev->of_node, "regmap");
+ if (IS_ERR(priv->tm_map))
+ return -ENODEV;
+ }

/*
* The status registers for each sensor are discontiguous
--
2.27.0
\
 
 \ /
  Last update: 2020-07-10 21:47    [W:0.044 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site