lkml.org 
[lkml]   [2020]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [Freedreno] [PATCH v4 4/7] drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR
On Thu, Jul 9, 2020 at 1:01 PM Akhil P Oommen <akhilpo@codeaurora.org> wrote:
>
> From: Sharat Masetty <smasetty@codeaurora.org>
>
> This patches replaces the previously used static DDR vote and uses
> dev_pm_opp_set_bw() to scale GPU->DDR bandwidth along with scaling
> GPU frequency. Also since the icc path voting is handled completely
> in the opp driver, remove the icc_path handle and its usage in the
> drm driver.
>
> Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
> ---
> drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 25 +++++++++++++++++--------
> 1 file changed, 17 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> index b547339..6fbfd7d 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> @@ -123,7 +123,7 @@ void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp)
>
> if (!gmu->legacy) {
> a6xx_hfi_set_freq(gmu, gmu->current_perf_index);
> - icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
> + dev_pm_opp_set_bw(&gpu->pdev->dev, opp);

What is the status of the patch to add dev_pm_opp_set_bw()? If it is
ready to go, and I get an ack-by from the OPP maintainer, I suppose I
could merge it via drm/msm.

Otherwise should we consider pulling in a private copy of it into
drm/msm (and then drop it to use the helper in, hopefully, the next
cycle)?

I'm pulling the patches preceding this one into msm-next-staging to do
some testing. And the dt patches following this one would normally
get merged via Bjorn. At the moment, I'm not sure what to do with
this one.

BR,
-R

> return;
> }
>
> @@ -149,11 +149,7 @@ void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp)
> if (ret)
> dev_err(gmu->dev, "GMU set GPU frequency error: %d\n", ret);
>
> - /*
> - * Eventually we will want to scale the path vote with the frequency but
> - * for now leave it at max so that the performance is nominal.
> - */
> - icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
> + dev_pm_opp_set_bw(&gpu->pdev->dev, opp);
> }
>
> unsigned long a6xx_gmu_get_freq(struct msm_gpu *gpu)
> @@ -840,6 +836,19 @@ static void a6xx_gmu_set_initial_freq(struct msm_gpu *gpu, struct a6xx_gmu *gmu)
> dev_pm_opp_put(gpu_opp);
> }
>
> +static void a6xx_gmu_set_initial_bw(struct msm_gpu *gpu, struct a6xx_gmu *gmu)
> +{
> + struct dev_pm_opp *gpu_opp;
> + unsigned long gpu_freq = gmu->gpu_freqs[gmu->current_perf_index];
> +
> + gpu_opp = dev_pm_opp_find_freq_exact(&gpu->pdev->dev, gpu_freq, true);
> + if (IS_ERR_OR_NULL(gpu_opp))
> + return;
> +
> + dev_pm_opp_set_bw(&gpu->pdev->dev, gpu_opp);
> + dev_pm_opp_put(gpu_opp);
> +}
> +
> int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
> {
> struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
> @@ -864,7 +873,7 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
> }
>
> /* Set the bus quota to a reasonable value for boot */
> - icc_set_bw(gpu->icc_path, 0, MBps_to_icc(3072));
> + a6xx_gmu_set_initial_bw(gpu, gmu);
>
> /* Enable the GMU interrupt */
> gmu_write(gmu, REG_A6XX_GMU_AO_HOST_INTERRUPT_CLR, ~0);
> @@ -1040,7 +1049,7 @@ int a6xx_gmu_stop(struct a6xx_gpu *a6xx_gpu)
> a6xx_gmu_shutdown(gmu);
>
> /* Remove the bus vote */
> - icc_set_bw(gpu->icc_path, 0, 0);
> + dev_pm_opp_set_bw(&gpu->pdev->dev, NULL);
>
> /*
> * Make sure the GX domain is off before turning off the GMU (CX)
> --
> 2.7.4
>
> _______________________________________________
> Freedreno mailing list
> Freedreno@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/freedreno

\
 
 \ /
  Last update: 2020-07-10 21:41    [W:0.117 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site