lkml.org 
[lkml]   [2020]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] usb: cdns3: fix possible buffer overflow caused by bad DMA value
Date
Peter Chen <peter.chen@nxp.com> writes:

> On 20-05-30 11:24:00, Jia-Ju Bai wrote:
>> In cdns3_ep0_setup_phase():
>> struct usb_ctrlrequest *ctrl = priv_dev->setup_buf;
>>
>> Because priv_dev->setup_buf (allocated in cdns3_gadget_start) is stored
>> in DMA memory, and thus ctrl is a DMA value.
>>
>> cdns3_ep0_setup_phase()
>> cdns3_ep0_standard_request(priv_dev, ctrl)
>> cdns3_req_ep0_get_status(priv_dev, ctrl)
>> index = cdns3_ep_addr_to_index(ctrl->wIndex);
>> priv_ep = priv_dev->eps[index];
>>
>> cdns3_ep0_setup_phase()
>> cdns3_ep0_standard_request(priv_dev, ctrl)
>> cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 0)
>> cdns3_ep0_feature_handle_endpoint(priv_dev, ctrl, set)
>> index = cdns3_ep_addr_to_index(ctrl->wIndex);
>> priv_ep = priv_dev->eps[index];
>>
>> In these cases, ctrl->wIndex can be be modified at anytime by malicious
>> hardware, and thus a buffer overflow can occur when the code
>> "priv_dev->eps[index]" is executed.
>>
>
> Did you see the setup buffer is overwritten before the setup handling is
> finished?
>
>> To fix these possible bugs, index is checked before being used.
>
> I think the better fix is to use one additional buffer for struct
> usb_ctrlrequest, and copy the dma_buf to it after setup packet
> has received, then use the value stored in this buffer for later
> operation, it could avoid quitting the code which is useful in fact.

Why is this a better fix? If you don't have that endpoint index, you
shouldn't try to access it. However, I think the problem here is
slightly easier to solve :-)

>> diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
>> index e71240b386b4..0a80c7ade613 100644
>> --- a/drivers/usb/cdns3/ep0.c
>> +++ b/drivers/usb/cdns3/ep0.c
>> @@ -265,6 +265,8 @@ static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev,
>> return cdns3_ep0_delegate_req(priv_dev, ctrl);
>> case USB_RECIP_ENDPOINT:
>> index = cdns3_ep_addr_to_index(ctrl->wIndex);

diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
index 5e24c2e57c0d..96ba3eec805c 100644
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -107,7 +107,10 @@ void cdns3_set_register_bit(void __iomem *ptr, u32 mask)
*/
u8 cdns3_ep_addr_to_index(u8 ep_addr)
{
- return (((ep_addr & 0x7F)) + ((ep_addr & USB_DIR_IN) ? 16 : 0));
+ u8 num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+ u8 dir = ep_addr & USB_ENDPOINT_DIR_MASK;
+
+ return num + dir ? 16 : 0;
}

static int cdns3_get_dma_pos(struct cdns3_device *priv_dev,
This will guarantee that the number is never over the limit.

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-07-01 08:53    [W:0.266 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site