lkml.org 
[lkml]   [2020]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v6 10/13] drm/panel: st7703: Enter sleep after display off
Hi,
On Wed, Jul 01, 2020 at 12:31:23PM +0200, Ondrej Jirman wrote:
> The datasheet suggests to issue sleep in after display off
> as a part of the panel's shutdown sequence.

Out of curiosity: which exact datasheet did you use?

Reviewed-by: Guido Günther <agx@sigxcpu.org>

>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> drivers/gpu/drm/panel/panel-sitronix-st7703.c | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> index 5cd5503f894f..0c4167994d01 100644
> --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> @@ -395,8 +395,19 @@ static int st7703_disable(struct drm_panel *panel)
> {
> struct st7703 *ctx = panel_to_st7703(panel);
> struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0)
> + DRM_DEV_ERROR(ctx->dev,
> + "Failed to turn off the display: %d\n", ret);
>
> - return mipi_dsi_dcs_set_display_off(dsi);
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0)
> + DRM_DEV_ERROR(ctx->dev,
> + "Failed to enter sleep mode: %d\n", ret);
> +
> + return 0;
> }
>
> static int st7703_unprepare(struct drm_panel *panel)
> --
> 2.27.0
>

\
 
 \ /
  Last update: 2020-07-01 18:04    [W:1.281 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site