lkml.org 
[lkml]   [2020]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/6] hantro: Remove unused bytesused argument
Date
The driver doesn't need the bytesused argument.

For decoders, the plane bytesused is known and therefore,
buf_prepare is used to set it. For encoders, it's
handled by the codec_ops.done hook.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
---
drivers/staging/media/hantro/hantro_drv.c | 9 ++++-----
drivers/staging/media/hantro/hantro_hw.h | 2 +-
drivers/staging/media/hantro/imx8m_vpu_hw.c | 2 +-
drivers/staging/media/hantro/rk3288_vpu_hw.c | 7 +++----
drivers/staging/media/hantro/rk3399_vpu_hw.c | 7 +++----
5 files changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 88b5c5989d83..34367b169011 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -58,7 +58,6 @@ dma_addr_t hantro_get_ref(struct hantro_ctx *ctx, u64 ts)

static void hantro_job_finish(struct hantro_dev *vpu,
struct hantro_ctx *ctx,
- unsigned int bytesused,
enum vb2_buffer_state result)
{
struct vb2_v4l2_buffer *src, *dst;
@@ -82,7 +81,7 @@ static void hantro_job_finish(struct hantro_dev *vpu,
result);
}

-void hantro_irq_done(struct hantro_dev *vpu, unsigned int bytesused,
+void hantro_irq_done(struct hantro_dev *vpu,
enum vb2_buffer_state result)
{
struct hantro_ctx *ctx =
@@ -96,7 +95,7 @@ void hantro_irq_done(struct hantro_dev *vpu, unsigned int bytesused,
if (cancel_delayed_work(&vpu->watchdog_work)) {
if (result == VB2_BUF_STATE_DONE && ctx->codec_ops->done)
ctx->codec_ops->done(ctx);
- hantro_job_finish(vpu, ctx, bytesused, result);
+ hantro_job_finish(vpu, ctx, result);
}
}

@@ -111,7 +110,7 @@ void hantro_watchdog(struct work_struct *work)
if (ctx) {
vpu_err("frame processing timed out!\n");
ctx->codec_ops->reset(ctx);
- hantro_job_finish(vpu, ctx, 0, VB2_BUF_STATE_ERROR);
+ hantro_job_finish(vpu, ctx, VB2_BUF_STATE_ERROR);
}
}

@@ -164,7 +163,7 @@ static void device_run(void *priv)
return;

err_cancel_job:
- hantro_job_finish(ctx->dev, ctx, 0, VB2_BUF_STATE_ERROR);
+ hantro_job_finish(ctx->dev, ctx, VB2_BUF_STATE_ERROR);
}

static struct v4l2_m2m_ops vpu_m2m_ops = {
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index 2d6323cd6732..f066de6b592d 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -163,7 +163,7 @@ extern const u32 hantro_vp8_dec_mc_filter[8][6];

void hantro_watchdog(struct work_struct *work);
void hantro_run(struct hantro_ctx *ctx);
-void hantro_irq_done(struct hantro_dev *vpu, unsigned int bytesused,
+void hantro_irq_done(struct hantro_dev *vpu,
enum vb2_buffer_state result);
void hantro_start_prepare_run(struct hantro_ctx *ctx);
void hantro_end_prepare_run(struct hantro_ctx *ctx);
diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
index cb2420c5526e..c222de075ef4 100644
--- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
+++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
@@ -143,7 +143,7 @@ static irqreturn_t imx8m_vpu_g1_irq(int irq, void *dev_id)
vdpu_write(vpu, 0, G1_REG_INTERRUPT);
vdpu_write(vpu, G1_REG_CONFIG_DEC_CLK_GATE_E, G1_REG_CONFIG);

- hantro_irq_done(vpu, 0, state);
+ hantro_irq_done(vpu, state);

return IRQ_HANDLED;
}
diff --git a/drivers/staging/media/hantro/rk3288_vpu_hw.c b/drivers/staging/media/hantro/rk3288_vpu_hw.c
index b1cf2abb972f..7b299ee3e93d 100644
--- a/drivers/staging/media/hantro/rk3288_vpu_hw.c
+++ b/drivers/staging/media/hantro/rk3288_vpu_hw.c
@@ -113,17 +113,16 @@ static irqreturn_t rk3288_vepu_irq(int irq, void *dev_id)
{
struct hantro_dev *vpu = dev_id;
enum vb2_buffer_state state;
- u32 status, bytesused;
+ u32 status;

status = vepu_read(vpu, H1_REG_INTERRUPT);
- bytesused = vepu_read(vpu, H1_REG_STR_BUF_LIMIT) / 8;
state = (status & H1_REG_INTERRUPT_FRAME_RDY) ?
VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;

vepu_write(vpu, 0, H1_REG_INTERRUPT);
vepu_write(vpu, 0, H1_REG_AXI_CTRL);

- hantro_irq_done(vpu, bytesused, state);
+ hantro_irq_done(vpu, state);

return IRQ_HANDLED;
}
@@ -141,7 +140,7 @@ static irqreturn_t rk3288_vdpu_irq(int irq, void *dev_id)
vdpu_write(vpu, 0, G1_REG_INTERRUPT);
vdpu_write(vpu, G1_REG_CONFIG_DEC_CLK_GATE_E, G1_REG_CONFIG);

- hantro_irq_done(vpu, 0, state);
+ hantro_irq_done(vpu, state);

return IRQ_HANDLED;
}
diff --git a/drivers/staging/media/hantro/rk3399_vpu_hw.c b/drivers/staging/media/hantro/rk3399_vpu_hw.c
index 9ac1f2cb6a16..7a7962cf771e 100644
--- a/drivers/staging/media/hantro/rk3399_vpu_hw.c
+++ b/drivers/staging/media/hantro/rk3399_vpu_hw.c
@@ -92,17 +92,16 @@ static irqreturn_t rk3399_vepu_irq(int irq, void *dev_id)
{
struct hantro_dev *vpu = dev_id;
enum vb2_buffer_state state;
- u32 status, bytesused;
+ u32 status;

status = vepu_read(vpu, VEPU_REG_INTERRUPT);
- bytesused = vepu_read(vpu, VEPU_REG_STR_BUF_LIMIT) / 8;
state = (status & VEPU_REG_INTERRUPT_FRAME_READY) ?
VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;

vepu_write(vpu, 0, VEPU_REG_INTERRUPT);
vepu_write(vpu, 0, VEPU_REG_AXI_CTRL);

- hantro_irq_done(vpu, bytesused, state);
+ hantro_irq_done(vpu, state);

return IRQ_HANDLED;
}
@@ -120,7 +119,7 @@ static irqreturn_t rk3399_vdpu_irq(int irq, void *dev_id)
vdpu_write(vpu, 0, VDPU_REG_INTERRUPT);
vdpu_write(vpu, 0, VDPU_REG_AXI_CTRL);

- hantro_irq_done(vpu, 0, state);
+ hantro_irq_done(vpu, state);

return IRQ_HANDLED;
}
--
2.26.0.rc2
\
 
 \ /
  Last update: 2020-07-01 15:17    [W:0.040 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site