lkml.org 
[lkml]   [2020]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v6 0/3] DCMI set minimum cpufreq requirement
Date


On 7/1/20 2:59 PM, Benjamin Gaignard wrote:
> This series allow to STM32 camera interface (DCMI) to require a minimum
> frequency to the CPUs before start streaming frames from the sensor.
> The minimum frequency requirement is provided in the devide-tree node.
>
> Setting a minimum frequency for the CPUs is needed to ensure a quick handling
> of the interrupts between two sensor frames and avoid dropping half of them.
Please forget this version, the incoming version 7 should have fix your
remarks.

Sorry,
Benjamin
> version 6:
> - come back to version 4 and follow Valentin's suggestions about notifier
>
> version 5:
> - add a mutex to protect dcmi_irq_notifier_notify()
> - register notifier a probe time
>
> version 4:
> - simplify irq affinity handling by using only dcmi_irq_notifier_notify()
>
> version 3:
> - add a cpumask field to track boosted CPUs
> - add irq_affinity_notify callback
> - protect cpumask field with a mutex
>
> Benjamin Gaignard (3):
> dt-bindings: media: stm32-dcmi: Add DCMI min frequency property
> media: stm32-dcmi: Set minimum cpufreq requirement
> ARM: dts: stm32: Set DCMI frequency requirement for stm32mp15x
>
> .../devicetree/bindings/media/st,stm32-dcmi.yaml | 8 ++
> arch/arm/boot/dts/stm32mp151.dtsi | 1 +
> drivers/media/platform/stm32/stm32-dcmi.c | 138 +++++++++++++++++++--
> 3 files changed, 139 insertions(+), 8 deletions(-)
>
\
 
 \ /
  Last update: 2020-07-01 15:04    [W:0.043 / U:2.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site