lkml.org 
[lkml]   [2020]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/9] media: rkvdec: h264: Fix pic width and height in mbs
Date
The width and height in mbs is currently configured based on OUTPUT buffer
resolution, this works for frame pictures but can cause issues for field
pictures or when frmsize step_width is changed to support 10-bit decoding.

When frame_mbs_only_flag is 0 the height in mbs should be height of
the field instead of height of frame.

Validate pic_width_in_mbs_minus1 and pic_height_in_map_units_minus1
against CAPTURE buffer resolution and use these values to configure HW.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
drivers/staging/media/rkvdec/rkvdec-h264.c | 44 +++++++++++++++++++---
1 file changed, 39 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index f0cfed84d60d..c9aebeb8f9b3 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -672,8 +672,8 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
LOG2_MAX_PIC_ORDER_CNT_LSB_MINUS4);
WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO),
DELTA_PIC_ORDER_ALWAYS_ZERO_FLAG);
- WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.width, 16), PIC_WIDTH_IN_MBS);
- WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.height, 16), PIC_HEIGHT_IN_MBS);
+ WRITE_PPS(sps->pic_width_in_mbs_minus1 + 1, PIC_WIDTH_IN_MBS);
+ WRITE_PPS(sps->pic_height_in_map_units_minus1 + 1, PIC_HEIGHT_IN_MBS);
WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY),
FRAME_MBS_ONLY_FLAG);
WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD),
@@ -1058,10 +1058,33 @@ static void rkvdec_h264_stop(struct rkvdec_ctx *ctx)
kfree(h264_ctx);
}

-static void rkvdec_h264_run_preamble(struct rkvdec_ctx *ctx,
- struct rkvdec_h264_run *run)
+static int validate_sps(struct rkvdec_ctx *ctx,
+ const struct v4l2_ctrl_h264_sps *sps)
+{
+ unsigned int width, height;
+
+ if (WARN_ON(!sps))
+ return -EINVAL;
+
+ width = (sps->pic_width_in_mbs_minus1 + 1) * 16;
+ height = (sps->pic_height_in_map_units_minus1 + 1) * 16;
+
+ if (width > ctx->decoded_fmt.fmt.pix_mp.width ||
+ height > ctx->decoded_fmt.fmt.pix_mp.height) {
+ dev_err(ctx->dev->dev,
+ "unexpected bitstream resolution %ux%u\n",
+ width, height);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rkvdec_h264_run_preamble(struct rkvdec_ctx *ctx,
+ struct rkvdec_h264_run *run)
{
struct v4l2_ctrl *ctrl;
+ int ret;

ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl,
V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS);
@@ -1080,6 +1103,12 @@ static void rkvdec_h264_run_preamble(struct rkvdec_ctx *ctx,
run->scaling_matrix = ctrl ? ctrl->p_cur.p : NULL;

rkvdec_run_preamble(ctx, &run->base);
+
+ ret = validate_sps(ctx, run->sps);
+ if (ret)
+ return ret;
+
+ return 0;
}

static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
@@ -1088,8 +1117,13 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
struct rkvdec_dev *rkvdec = ctx->dev;
struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
struct rkvdec_h264_run run;
+ int ret;

- rkvdec_h264_run_preamble(ctx, &run);
+ ret = rkvdec_h264_run_preamble(ctx, &run);
+ if (ret) {
+ rkvdec_run_postamble(ctx, &run.base);
+ return ret;
+ }

/* Build the P/B{0,1} ref lists. */
v4l2_h264_init_reflist_builder(&reflist_builder, run.decode_params,
--
2.17.1
\
 
 \ /
  Last update: 2020-07-01 23:57    [W:0.167 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site