Messages in this thread | | | From | dillon.minfei@gmail ... | Subject | [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board | Date | Tue, 9 Jun 2020 21:26:39 +0800 |
| |
From: dillon min <dillon.minfei@gmail.com>
This patchset is intend to enable stmpe811 touch screen on stm32f429-disco board with three dts and one i2c driver changes.
has been validated by ts_print tool
Changes log: V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot
V3: just add change log in [PATCH V3 3/4] below ---
V2: remove id, blocks, irq-trigger from stmpe811 dts
V1: ARM: dts: stm32: add I2C3 support on STM32F429 SoC ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4 ARM: dts: stm32: enable stmpe811 on stm32429-disco board i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
dillon min (4): ARM: dts: stm32: add I2C3 support on STM32F429 SoC ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4 ARM: dts: stm32: enable stmpe811 on stm32429-disco board i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++ arch/arm/boot/dts/stm32f429-disco.dts | 47 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/stm32f429.dtsi | 12 +++++++++ drivers/i2c/busses/i2c-stm32f4.c | 12 ++++++--- 4 files changed, 80 insertions(+), 3 deletions(-)
-- 2.7.4
| |