lkml.org 
[lkml]   [2020]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] arm64: acpi: fix UBSAN warning
From
Date
Hi,

On 6/8/20 3:38 PM, Nick Desaulniers wrote:
> Will reported a UBSAN warning:
>
> UBSAN: null-ptr-deref in arch/arm64/kernel/smp.c:596:6
> member access within null pointer of type 'struct acpi_madt_generic_interrupt'
> CPU: 0 PID: 0 Comm: swapper Not tainted 5.7.0-rc6-00124-g96bc42ff0a82 #1
> Call trace:
> dump_backtrace+0x0/0x384
> show_stack+0x28/0x38
> dump_stack+0xec/0x174
> handle_null_ptr_deref+0x134/0x174
> __ubsan_handle_type_mismatch_v1+0x84/0xa4
> acpi_parse_gic_cpu_interface+0x60/0xe8
> acpi_parse_entries_array+0x288/0x498
> acpi_table_parse_entries_array+0x178/0x1b4
> acpi_table_parse_madt+0xa4/0x110
> acpi_parse_and_init_cpus+0x38/0x100
> smp_init_cpus+0x74/0x258
> setup_arch+0x350/0x3ec
> start_kernel+0x98/0x6f4
>
> This is from the use of the ACPI_OFFSET in
> arch/arm64/include/asm/acpi.h. Replace its use with offsetof from
> include/linux/stddef.h which should implement the same logic using
> __builtin_offsetof, so that UBSAN wont warn.

I looked at the longer thread about this, given that it appears to be a
false positive with respect to the macro, I tend to prefer Ard's
suggestion of just changing the offset value (1 should be sufficient
rather than 0) to avoid this kind of problem in the future.

But either way, this change looks fine too.

Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>

Thanks,

>
> Link: https://lore.kernel.org/lkml/20200521100952.GA5360@willie-the-truck/
> Cc: stable@vger.kernel.org
> Reported-by: Will Deacon <will@kernel.org>
> Suggested-by: Ard Biesheuvel <ardb@kernel.org>
> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
> ---
> Changes V1 -> V2:
> * Just fix one of the two warnings, specific to arm64.
> * Put warning in commit message.
>
> arch/arm64/include/asm/acpi.h | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
> index b263e239cb59..a45366c3909b 100644
> --- a/arch/arm64/include/asm/acpi.h
> +++ b/arch/arm64/include/asm/acpi.h
> @@ -12,6 +12,7 @@
> #include <linux/efi.h>
> #include <linux/memblock.h>
> #include <linux/psci.h>
> +#include <linux/stddef.h>
>
> #include <asm/cputype.h>
> #include <asm/io.h>
> @@ -31,14 +32,14 @@
> * is therefore used to delimit the MADT GICC structure minimum length
> * appropriately.
> */
> -#define ACPI_MADT_GICC_MIN_LENGTH ACPI_OFFSET( \
> +#define ACPI_MADT_GICC_MIN_LENGTH offsetof( \
> struct acpi_madt_generic_interrupt, efficiency_class)
>
> #define BAD_MADT_GICC_ENTRY(entry, end) \
> (!(entry) || (entry)->header.length < ACPI_MADT_GICC_MIN_LENGTH || \
> (unsigned long)(entry) + (entry)->header.length > (end))
>
> -#define ACPI_MADT_GICC_SPE (ACPI_OFFSET(struct acpi_madt_generic_interrupt, \
> +#define ACPI_MADT_GICC_SPE (offsetof(struct acpi_madt_generic_interrupt, \
> spe_interrupt) + sizeof(u16))
>
> /* Basic configuration for ACPI */
>

\
 
 \ /
  Last update: 2020-06-09 21:52    [W:0.060 / U:1.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site