lkml.org 
[lkml]   [2020]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] net: ethernet: mvneta: add support for 2.5G DRSGMII mode
Date
The Marvell MVNETA Ethernet controller supports a 2.5 Gbps SGMII mode
called DRSGMII.

This patch adds a corresponding phy-mode string 'drsgmii' and parses it
from DT. The MVNETA then configures the SERDES protocol value
accordingly.

It was successfully tested on a MV78460 connected to a FPGA.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
.../devicetree/bindings/net/ethernet-controller.yaml | 1 +
drivers/net/ethernet/marvell/mvneta.c | 7 ++++++-
include/linux/phy.h | 3 +++
3 files changed, 10 insertions(+), 1 deletion(-)

This patch has already been sent 3 years ago here:
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20170123142206.5390-1-jlu@pengutronix.de/
Since then the driver has evolved a lot. 2.5Gbps is properly configured in the
MAC now.

diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index ac471b60ed6ae..4eead3c89bd3e 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -66,6 +66,7 @@ properties:
- gmii
- sgmii
- qsgmii
+ - drsgmii
- tbi
- rev-mii
- rmii
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 51889770958d8..807c698576c74 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -109,6 +109,7 @@
#define MVNETA_SERDES_CFG 0x24A0
#define MVNETA_SGMII_SERDES_PROTO 0x0cc7
#define MVNETA_QSGMII_SERDES_PROTO 0x0667
+#define MVNETA_DRSGMII_SERDES_PROTO 0x1107
#define MVNETA_TYPE_PRIO 0x24bc
#define MVNETA_FORCE_UNI BIT(21)
#define MVNETA_TXQ_CMD_1 0x24e4
@@ -3734,10 +3735,11 @@ static void mvneta_validate(struct phylink_config *config,
struct mvneta_port *pp = netdev_priv(ndev);
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };

- /* We only support QSGMII, SGMII, 802.3z and RGMII modes */
+ /* We only support QSGMII, SGMII, DRSGMII, 802.3z and RGMII modes */
if (state->interface != PHY_INTERFACE_MODE_NA &&
state->interface != PHY_INTERFACE_MODE_QSGMII &&
state->interface != PHY_INTERFACE_MODE_SGMII &&
+ state->interface != PHY_INTERFACE_MODE_DRSGMII &&
!phy_interface_mode_is_8023z(state->interface) &&
!phy_interface_mode_is_rgmii(state->interface)) {
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
@@ -3851,6 +3853,7 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,

if (state->interface == PHY_INTERFACE_MODE_QSGMII ||
state->interface == PHY_INTERFACE_MODE_SGMII ||
+ state->interface == PHY_INTERFACE_MODE_DRSGMII ||
phy_interface_mode_is_8023z(state->interface))
new_ctrl2 |= MVNETA_GMAC2_PCS_ENABLE;

@@ -4968,6 +4971,8 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
else if (phy_mode == PHY_INTERFACE_MODE_SGMII ||
phy_interface_mode_is_8023z(phy_mode))
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
+ else if (phy_mode == PHY_INTERFACE_MODE_DRSGMII)
+ mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_DRSGMII_SERDES_PROTO);
else if (!phy_interface_mode_is_rgmii(phy_mode))
return -EINVAL;

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 2432ca463ddc0..bf3276b330f9e 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -109,6 +109,7 @@ typedef enum {
PHY_INTERFACE_MODE_USXGMII,
/* 10GBASE-KR - with Clause 73 AN */
PHY_INTERFACE_MODE_10GKR,
+ PHY_INTERFACE_MODE_DRSGMII,
PHY_INTERFACE_MODE_MAX,
} phy_interface_t;

@@ -190,6 +191,8 @@ static inline const char *phy_modes(phy_interface_t interface)
return "usxgmii";
case PHY_INTERFACE_MODE_10GKR:
return "10gbase-kr";
+ case PHY_INTERFACE_MODE_DRSGMII:
+ return "drsgmii";
default:
return "unknown";
}
--
2.27.0
\
 
 \ /
  Last update: 2020-06-08 09:48    [W:0.089 / U:1.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site