lkml.org 
[lkml]   [2020]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/edid: add support for min horizontal rate equal to max horizontal rate
Date
According to EDID spec, table 3.26, byte #6 and #8, which said "Minimum
rate value shall be less than or equal to maximum rate value". The minimum
horizontal/vertical rate value is able to be equal to maximum horizontal/
veritcal rate value.

This change check if h/v-sync excess maximum horizontal/vertical rate if
hmin equal to hmax or vmin equal to vmax.

Signed-off-by: Cyrus Lien <cyrus.lien@canonical.com>
---
drivers/gpu/drm/drm_edid.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index fed653f13c26..23878320eabd 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -2674,6 +2674,9 @@ mode_in_hsync_range(const struct drm_display_mode *mode,
hmax += ((t[4] & 0x08) ? 255 : 0);
hsync = drm_mode_hsync(mode);

+ if (hmax == hmin)
+ return (hsync <= hmax);
+
return (hsync <= hmax && hsync >= hmin);
}

@@ -2691,6 +2694,9 @@ mode_in_vsync_range(const struct drm_display_mode *mode,
vmax += ((t[4] & 0x02) ? 255 : 0);
vsync = drm_mode_vrefresh(mode);

+ if (vmax == vmin)
+ return (vsync <= vmax);
+
return (vsync <= vmax && vsync >= vmin);
}

--
2.25.1
\
 
 \ /
  Last update: 2020-06-08 21:57    [W:0.035 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site