lkml.org 
[lkml]   [2020]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0
Date
ZBOOT_ROM_TEXT and ZBOOT_ROM_BSS are defined as 'hex' but had a default
of "0". Kconfig will helpfully expand a text entry of 0 to 0x0 but
because this is not the same as the default value it was treated as
being explicitly set when running 'make savedefconfig' so most arm
defconfigs have CONFIG_ZBOOT_ROM_TEXT=0x0 and CONFIG_ZBOOT_ROM_BSS=0x0.

Change the default to 0x0 which will mean next time the defconfigs are
re-generated the spurious config entries will be removed.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
I'm assuming there's some semi-automated regular process that syncs up the
defconfigs so I've not created a patch with the result of regenerating the
defconfigs.

arch/arm/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fb6c85c5d344..38c0cab598bf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1750,7 +1750,7 @@ config DEPRECATED_PARAM_STRUCT
# TEXT and BSS so we preserve their values in the config files.
config ZBOOT_ROM_TEXT
hex "Compressed ROM boot loader base address"
- default "0"
+ default 0x0
help
The physical address at which the ROM-able zImage is to be
placed in the target. Platforms which normally make use of
@@ -1761,7 +1761,7 @@ config ZBOOT_ROM_TEXT

config ZBOOT_ROM_BSS
hex "Compressed ROM boot loader BSS address"
- default "0"
+ default 0x0
help
The base address of an area of read/write memory in the target
for the ROM-able zImage which must be available while the
--
2.25.1
\
 
 \ /
  Last update: 2020-06-09 04:26    [W:0.030 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site