lkml.org 
[lkml]   [2020]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.7 002/274] ath10k: Fix the race condition in firmware dump work queue
Date
From: Maharaja Kennadyrajan <mkenna@codeaurora.org>

[ Upstream commit 3d1c60460fb2823a19ead9e6ec8f184dd7271aa7 ]

There is a race condition, when the user writes 'hw-restart' and
'hard' in the simulate_fw_crash debugfs file without any delay.
In the above scenario, the firmware dump work queue(scheduled by
'hard') should be handled gracefully, while the target is in the
'hw-restart'.

Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044

Co-developed-by: Govindaraj Saminathan <gsamin@codeaurora.org>
Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org>
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585213077-28439-1-git-send-email-mkenna@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/pci.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index ded7a220a4aa..cd1c5d60261f 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2074,6 +2074,7 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
ath10k_pci_irq_sync(ar);
napi_synchronize(&ar->napi);
napi_disable(&ar->napi);
+ cancel_work_sync(&ar_pci->dump_work);

/* Most likely the device has HTT Rx ring configured. The only way to
* prevent the device from accessing (and possible corrupting) host
--
2.25.1
\
 
 \ /
  Last update: 2020-06-09 03:10    [W:0.828 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site