lkml.org 
[lkml]   [2020]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] virtio_net: Unregister and re-register xdp_rxq across freeze/restore
On Fri, Jun 05, 2020 at 02:46:24PM -0700, Sean Christopherson wrote:
> Unregister each queue's xdp_rxq during freeze, and re-register the new
> instance during restore. All queues are released during free and
> recreated during restore, i.e. the pre-freeze xdp_rxq will be lost.
>
> The bug is detected by WARNs in xdp_rxq_info_unreg() and
> xdp_rxq_info_unreg_mem_model() that fire after a suspend/resume cycle as
> virtnet_close() attempts to unregister an uninitialized xdp_rxq object.
>
> ------------[ cut here ]------------
> Driver BUG
> WARNING: CPU: 0 PID: 880 at net/core/xdp.c:163 xdp_rxq_info_unreg+0x48/0x50
> Modules linked in:
> CPU: 0 PID: 880 Comm: ip Not tainted 5.7.0-rc5+ #80
> Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
> RIP: 0010:xdp_rxq_info_unreg+0x48/0x50
> Code: <0f> 0b eb ca 0f 1f 40 00 0f 1f 44 00 00 53 48 83 ec 10 8b 47 0c 83
> RSP: 0018:ffffc900001ab540 EFLAGS: 00010286
> RAX: 0000000000000000 RBX: ffff88827f83ac80 RCX: 0000000000000000
> RDX: 000000000000000a RSI: ffffffff8253bc2a RDI: ffffffff825397ec
> RBP: 0000000000000000 R08: ffffffff8253bc20 R09: 000000000000000a
> R10: ffffc900001ab548 R11: 0000000000000370 R12: ffff88817a89c000
> R13: 0000000000000000 R14: ffffc900001abbc8 R15: 0000000000000001
> FS: 00007f48b70e70c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007f48b6634950 CR3: 0000000277f1d002 CR4: 0000000000160eb0
> Call Trace:
> virtnet_close+0x6a/0xb0
> __dev_close_many+0x91/0x100
> __dev_change_flags+0xc1/0x1c0
> dev_change_flags+0x23/0x60
> do_setlink+0x350/0xdf0
> __rtnl_newlink+0x553/0x860
> rtnl_newlink+0x43/0x60
> rtnetlink_rcv_msg+0x289/0x340
> netlink_rcv_skb+0xd1/0x110
> netlink_unicast+0x203/0x310
> netlink_sendmsg+0x32b/0x460
> sock_sendmsg+0x5b/0x60
> ____sys_sendmsg+0x23e/0x260
> ___sys_sendmsg+0x88/0xd0
> __sys_sendmsg+0x63/0xa0
> do_syscall_64+0x4c/0x170
> entry_SYSCALL_64_after_hwframe+0x44/0xa9
> ------------[ cut here ]------------
>
> Cc: Jesper Dangaard Brouer <brouer@redhat.com>
> Fixes: 754b8a21a96d5 ("virtio_net: setup xdp_rxq_info")
> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> ---
>
> Disclaimer: I am not remotely confident that this patch is 100% correct
> or complete, my VirtIO knowledge is poor and my networking knowledge is
> downright abysmal.
>
> drivers/net/virtio_net.c | 37 +++++++++++++++++++++++++++++--------
> 1 file changed, 29 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index ba38765dc490..61055be3615e 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -1469,6 +1469,21 @@ static int virtnet_poll(struct napi_struct *napi, int budget)
> return received;
> }
>
> +static int virtnet_reg_xdp(struct xdp_rxq_info *xdp_rxq,
> + struct net_device *dev, u32 queue_index)
> +{
> + int err;
> +
> + err = xdp_rxq_info_reg(xdp_rxq, dev, queue_index);
> + if (err < 0)
> + return err;
> +
> + err = xdp_rxq_info_reg_mem_model(xdp_rxq, MEM_TYPE_PAGE_SHARED, NULL);
> + if (err < 0)
> + xdp_rxq_info_unreg(xdp_rxq);
> + return err;
> +}
> +
> static int virtnet_open(struct net_device *dev)
> {
> struct virtnet_info *vi = netdev_priv(dev);
> @@ -1480,17 +1495,10 @@ static int virtnet_open(struct net_device *dev)
> if (!try_fill_recv(vi, &vi->rq[i], GFP_KERNEL))
> schedule_delayed_work(&vi->refill, 0);
>
> - err = xdp_rxq_info_reg(&vi->rq[i].xdp_rxq, dev, i);
> + err = virtnet_reg_xdp(&vi->rq[i].xdp_rxq, dev, i);
> if (err < 0)
> return err;
>
> - err = xdp_rxq_info_reg_mem_model(&vi->rq[i].xdp_rxq,
> - MEM_TYPE_PAGE_SHARED, NULL);
> - if (err < 0) {
> - xdp_rxq_info_unreg(&vi->rq[i].xdp_rxq);
> - return err;
> - }
> -
> virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi);
> virtnet_napi_tx_enable(vi, vi->sq[i].vq, &vi->sq[i].napi);
> }
> @@ -2306,6 +2314,7 @@ static void virtnet_freeze_down(struct virtio_device *vdev)
>
> if (netif_running(vi->dev)) {
> for (i = 0; i < vi->max_queue_pairs; i++) {
> + xdp_rxq_info_unreg(&vi->rq[i].xdp_rxq);
> napi_disable(&vi->rq[i].napi);
> virtnet_napi_tx_disable(&vi->sq[i].napi);

I suspect the right thing to do is to first disable all NAPI,
then play with XDP. Generally cleanup in the reverse order
of init is a good idea.


> }
> @@ -2313,6 +2322,8 @@ static void virtnet_freeze_down(struct virtio_device *vdev)
> }
>
> static int init_vqs(struct virtnet_info *vi);
> +static void virtnet_del_vqs(struct virtnet_info *vi);
> +static void free_receive_page_frags(struct virtnet_info *vi);

I'd really rather we reordered code so forward decls are not necessary.

> static int virtnet_restore_up(struct virtio_device *vdev)
> {
> @@ -2331,6 +2342,10 @@ static int virtnet_restore_up(struct virtio_device *vdev)
> schedule_delayed_work(&vi->refill, 0);
>
> for (i = 0; i < vi->max_queue_pairs; i++) {
> + err = virtnet_reg_xdp(&vi->rq[i].xdp_rxq, vi->dev, i);
> + if (err)
> + goto free_vqs;
> +
> virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi);
> virtnet_napi_tx_enable(vi, vi->sq[i].vq,
> &vi->sq[i].napi);
> @@ -2340,6 +2355,12 @@ static int virtnet_restore_up(struct virtio_device *vdev)
> netif_tx_lock_bh(vi->dev);
> netif_device_attach(vi->dev);
> netif_tx_unlock_bh(vi->dev);
> + return 0;
> +
> +free_vqs:
> + cancel_delayed_work_sync(&vi->refill);
> + free_receive_page_frags(vi);
> + virtnet_del_vqs(vi);


I am not sure this is safe to do after device-ready.

Can reg xdp happen before device ready?


> return err;
> }
>
> --
> 2.26.0

\
 
 \ /
  Last update: 2020-06-07 15:23    [W:0.051 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site