lkml.org 
[lkml]   [2020]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: v5.7: new core kernel option missing help text
On Thu, 4 Jun 2020 at 17:38, Valentin Schneider
<valentin.schneider@arm.com> wrote:
>
>
> On 04/06/20 14:05, Thara Gopinath wrote:
> > On Thu, 4 Jun 2020 at 06:56, Valentin Schneider <valentin.schneider@arm.com>
> >>
> >> Right, s/defconfig/arch kconfig/ or somesuch.
> >>
> >
> > CPU_FREQ_THERMAL also has to be enabled for this to be effective.
> > Since arm64 defconfig enables CPU_FREQ_THERMAL (by enabling CPU_THERMAL),
> > it should be ok to enable it in arm64/Kconfig. (same with arm/Kconfig)
> >
> > Another option is to select the SCHED_THERMAL_PRESSURE when
> > CPU_FREQ_THERMAL
> > is enabled in drivers/thermal/Kconfig.
> >
>
> So interestingly while arch_set_thermal_pressure() (which just writes to a
> pcpu variable) is defined in sched/core.c, arch_scale_thermal_pressure()
> (which just returns aforementionned pcpu variable) is defined in
> arch_topology...
>
> I'm thinking at this point we might as well turn the
> arch_scale_thermal_pressure() stub into what arch_topology does. This would
> effectively let any architecture use thermal pressure, providing they use
> cpufreq cooling.
>
> If we want to keep changes contained to Kconfigs, for now I think the
> safest would be:
>
> ---
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 16fbf74030fe..1e92080dc275 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -46,6 +46,7 @@ config ARM
> select EDAC_ATOMIC_SCRUB
> select GENERIC_ALLOCATOR
> select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
> + select SCHED_THERMAL_PRESSURE if GENERIC_ARCH_TOPOLOGY

I think that SCHED_THERMAL_PRESSURE depends on ARM_CPU_TOPOLOGY but
not on GENERIC_ARCH_TOPOLOGY.
ARM_CPU_TOPOLOGY is used to define arch_scale_thermal_pressure for arm
architecture
and we only use the header file of the generic arch_topology.h.
Function like arch_set_thermal_pressure() is in sched/core.c

> select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
> select GENERIC_CLOCKEVENTS_BROADCAST if SMP
> select GENERIC_CPU_AUTOPROBE
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 552d36cacc05..cc1944fbae51 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -98,6 +98,7 @@ config ARM64
> select FRAME_POINTER
> select GENERIC_ALLOCATOR
> select GENERIC_ARCH_TOPOLOGY
> + select SCHED_THERMAL_PRESSURE
> select GENERIC_CLOCKEVENTS
> select GENERIC_CLOCKEVENTS_BROADCAST
> select GENERIC_CPU_AUTOPROBE
> diff --git a/init/Kconfig b/init/Kconfig
> index 74a5ac65644f..ba846f6e805b 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -439,8 +439,11 @@ config HAVE_SCHED_AVG_IRQ
> depends on SMP
>
> config SCHED_THERMAL_PRESSURE
> - bool "Enable periodic averaging of thermal pressure"
> + def_bool n
> depends on SMP
> + depends on CPU_FREQ_THERMAL
> + help
> + <helpful thing here>
>
> config BSD_PROCESS_ACCT
> bool "BSD Process Accounting"
> ---
>
>
>
> > Warm Regards
> > Thara

\
 
 \ /
  Last update: 2020-06-05 09:04    [W:0.092 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site