lkml.org 
[lkml]   [2020]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] dmaengine: tegra210-adma: fix pm_runtime_get_sync failure
From
Date

On 03/06/2020 19:38, Navid Emamdoost wrote:
> Calling pm_runtime_get_sync increments the counter even in case of
> failure, causing incorrect ref count. Call pm_runtime_put if
> pm_runtime_get_sync fails.
>
> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
> ---
> drivers/dma/tegra210-adma.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
> index c4ce5dfb149b..87f2a1bed3aa 100644
> --- a/drivers/dma/tegra210-adma.c
> +++ b/drivers/dma/tegra210-adma.c
> @@ -869,8 +869,10 @@ static int tegra_adma_probe(struct platform_device *pdev)
> pm_runtime_enable(&pdev->dev);
>
> ret = pm_runtime_get_sync(&pdev->dev);
> - if (ret < 0)
> + if (ret < 0) {
> + pm_runtime_put_sync(&pdev->dev);
> goto rpm_disable;
> + }

I would prefer it if you did not add the pm_runtime_put_sync() call here
because there is already one in the error path that can be used.

Jon

--
nvpublic

\
 
 \ /
  Last update: 2020-06-04 19:44    [W:0.066 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site