lkml.org 
[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings
Date
This driver is tested with two panels with Apq8016-IFC6309 board
https://www.inforcecomputing.com/products/single-board-computers-sbc/qualcomm-snapdragon-410-inforce-6309-micro-sbc

1. 1366x768@60 auo,b101xtn01 data-mapping = "jeida-24"
2. 800x480@60 innolux,at070tn92 data-mapping = "vesa-24"

Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>

---
v1:
Initial version wast .txt file

v2:
From txt to yaml file format

v3:
* Andrzej Hajda review comments incorporated
dual port lvds implemented

* Laurent Pinchart review comments incorporated
dsi lanes property removed and it is dynamically
picked from the dsi ports
VESA/JEIDA format picked from panel-lvds dts
---
.../display/bridge/toshiba,tc358775.yaml | 204 ++++++++++++++++++
1 file changed, 204 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
new file mode 100644
index 000000000000..ec53d62d408b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358775 DSI to LVDS bridge bindings
+
+maintainers:
+ - Vinay Simha BN <simhavcs@gmail.com>
+
+description: |
+ This binding supports DSI to LVDS bridge TC358775
+
+properties:
+ compatible:
+ const: toshiba,tc358775
+
+ reg:
+ maxItems: 1
+ description: i2c address of the bridge, 0x0f
+
+ vdd-supply:
+ maxItems: 1
+ description: 1.2V LVDS Power Supply
+
+ vddio-supply:
+ maxItems: 1
+ description: 1.8V IO Power Supply
+
+ stby-gpios:
+ maxItems: 1
+ description: Standby pin, Low active
+
+ reset-gpios:
+ maxItems: 1
+ description: Hardware reset, Low active
+
+ ports:
+ type: object
+ description:
+ A node containing input and output port nodes with endpoint definitions
+ as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ port@0:
+ type: object
+ description: |
+ DSI Input. The remote endpoint phandle should be a
+ reference to a valid mipi_dsi_host device node.
+
+ port@1:
+ type: object
+ description: |
+ Video port for LVDS output (panel or connector).
+
+ port@2:
+ type: object
+ description: |
+ Video port for Dual link LVDS output (panel or connector).
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vddio-supply
+ - stby-gpios
+ - reset-gpios
+ - ports
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c@78b8000 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ reg = <0x078b8000 0x500>;
+ clock-frequency = <400000>; /* fastmode operation */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tc_bridge: bridge@f {
+ compatible = "toshiba,tc358775";
+ reg = <0x0f>;
+
+ vdd-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+
+ stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ d2l_in_test: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+ };
+
+ dsi@1a98000 {
+ reg = <0x1a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ remote-endpoint = <&d2l_in_test>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
+
+ - |
+ i2c@78b8000 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ reg = <0x078b8000 0x500>;
+ clock-frequency = <400000>; /* fastmode operation */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tc_bridge_dual: bridge@f {
+ compatible = "toshiba,tc358775";
+ reg = <0x0f>;
+
+ vdd-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+
+ stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ d2l_in_dual: endpoint {
+ remote-endpoint = <&dsi0_out_dual>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in1>;
+ };
+ };
+ };
+ };
+ };
+
+ dsi@1a98000 {
+ reg = <0x1a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ dsi0_out_dual: endpoint {
+ remote-endpoint = <&d2l_in_dual>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
+...
--
2.17.1
\
 
 \ /
  Last update: 2020-06-30 13:02    [W:0.044 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site