lkml.org 
[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/4] i2c: stm32f7: Add SMBus-specific protocols support
Hi Wolfram,

> I meant a generic binding for the host-controller. It could be seen as a
> HW description if we need HostNotify on that bus or not.
>
> Maybe it becomes more clear with the R-Car I2C controller as an example.
> It only supports one slave address. If I want HostNotify there, I can't
> use another slave backend. Now, it could be that I need the slave EEPROM
> backend, although there is a HostNotify capable device on the bus. So, I
> am leaning to have a generic "host-notify" binding for the host.
>
> I consider platform_data legacy. If we use device_property, we should be
> safe regarding all current and future HW descriptions, or?

Ok, understood. Fine for me that way as well. I am just a little worrying that
the "host-notify" can now be present in both controller AND slave nodes
and might be a bit hard to understand. At the same time I don't have a better
proposal for naming the binding for the controller.

Please do not consider serie v2 I just posted few days ago and I will
post a serie v3 updating the binding information and using the host-notify
binding in the i2c-stm32f7 driver.

Alain

\
 
 \ /
  Last update: 2020-06-30 11:32    [W:0.075 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site