lkml.org 
[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH v2 00/18] Support for Tegra video capture from external sensor
From
Date
On 17/06/2020 03:41, Sowjanya Komatineni wrote:
> This series adds support for video capture from external camera sensor to
> Tegra video driver.
>
> Jetson TX1 has camera expansion connector and supports custom camera module
> designed as per TX1 design specification.
>
> This series also enables camera capture support for Jetson Nano which has
> Raspberry PI camera header.
>
> This series is tested with IMX219 camera sensor.

Which tree did you base this on? The media_tree master? Or the mainline kernel?

I now have the imx219 detected, but if I try to stream I get this:

$ v4l2-ctl --stream-mmap
<[ 512.840944] video4linux video0: MW_ACK_DONE syncpt timeout: -11
[ 512.972975] video4linux video0: frame start syncpt timeout: -11
<VIDIOC_DQBUF: failed: Input/output error
[ 513.180770] video4linux video0: MW_ACK_DONE syncpt timeout: -11

And then everything hangs and I need to reset.

I'm testing with the media_tree master with your patches on top.

Regards,

Hans

>
> This series include,
>
> VI I2C related fixes
> - Camera sensor programming happens through VI I2C which is on host1x bus.
> - These patches includes device tree and I2C driver fixes for VI I2C.
>
> Tegra video driver updates
> - TPG Vs Non-TPG based on Kconfig
> - Support for external sensor video capture based on device graph from DT.
> - Support for selection ioctl operations
> - Tegra MIPI CSI pads calibration
> - CSI T-CLK and T-HS settle time computation based on clock rates.
>
> Host1x driver updates
> - Adds API to allow creating mipi device for specific device node.
> - Splits MIPI pads calibrate start and waiting for calibration to be done.
>
> Device tree updates
> - Adds camera connector 2V8, 1V8, 1V2 regulator supplies to Jetson TX1 DT.
> - Enabled VI and CSI support in Jetson Nano DT.
>
>
> Delta between patch versions:
>
> [v2]: Includes below changes based on v1 feedback
> - dt-binding document and the driver update for device graph to use
> separate ports for sink endpoint and source endpoint for csi.
> - Use data-lanes endpoint property for csi.
> - Update tegra_mipi_request() to take device node pointer argument
> rather than adding extra API.
> - Remove checking for clk pointer before clk_disable.
>
>
> Sowjanya Komatineni (18):
> dt-bindings: i2c: tegra: Document Tegra210 VI I2C clocks and
> power-domains
> arm64: tegra: Add missing clocks and power-domains to Tegra210 VI I2C
> i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM
> i2c: tegra: Fix the error path in tegra_i2c_runtime_resume
> i2c: tegra: Fix runtime resume to re-init VI I2C
> i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c
> media: tegra-video: Fix channel format alignment
> media: tegra-video: Enable TPG based on kernel config
> media: tegra-video: Update format lookup to offset based
> dt-bindings: tegra: Update VI and CSI bindings with port info
> media: tegra-video: Add support for external sensor capture
> media: tegra-video: Add support for selection ioctl ops
> gpu: host1x: mipi: Update tegra_mipi_request() to be node based
> gpu: host1x: mipi: Split tegra_mipi_calibrate and tegra_mipi_wait
> media: tegra-video: Add CSI MIPI pads calibration
> media: tegra-video: Compute settle times based on the clock rate
> arm64: tegra: jetson-tx1: Add camera supplies
> arm64: tegra: Enable Tegra VI CSI support for Jetson Nano
>
> .../display/tegra/nvidia,tegra20-host1x.txt | 92 ++-
> .../devicetree/bindings/i2c/nvidia,tegra20-i2c.txt | 19 +-
> arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 41 ++
> arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 10 +
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 6 +
> drivers/gpu/drm/tegra/dsi.c | 9 +-
> drivers/gpu/host1x/mipi.c | 30 +-
> drivers/i2c/busses/i2c-tegra.c | 39 +-
> drivers/staging/media/tegra-video/Kconfig | 7 +
> drivers/staging/media/tegra-video/csi.c | 245 ++++++-
> drivers/staging/media/tegra-video/csi.h | 8 +
> drivers/staging/media/tegra-video/tegra210.c | 25 +-
> drivers/staging/media/tegra-video/vi.c | 770 +++++++++++++++++++--
> drivers/staging/media/tegra-video/vi.h | 23 +-
> drivers/staging/media/tegra-video/video.c | 23 +-
> include/linux/host1x.h | 4 +-
> 16 files changed, 1251 insertions(+), 100 deletions(-)
>

\
 
 \ /
  Last update: 2020-06-30 11:22    [W:0.248 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site