lkml.org 
[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 07/18] nitro_enclaves: Init misc device providing the ioctl interface
On Mon, Jun 29, 2020 at 08:45:25PM +0300, Paraschiv, Andra-Irina wrote:
>
>
> On 29/06/2020 19:20, Greg KH wrote:
> >
> > On Mon, Jun 22, 2020 at 11:03:18PM +0300, Andra Paraschiv wrote:
> > > +static int __init ne_init(void)
> > > +{
> > > + struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_AMAZON,
> > > + PCI_DEVICE_ID_NE, NULL);
> > > + int rc = -EINVAL;
> > > +
> > > + if (!pdev)
> > > + return -ENODEV;
> > Ick, that's a _very_ old-school way of binding to a pci device. Please
> > just be a "real" pci driver and your probe function will be called if
> > your hardware is present (or when it shows up.) To do it this way
> > prevents your driver from being auto-loaded for when your hardware is
> > seen in the system, as well as lots of other things.
>
> This check is mainly here in the case any codebase is added before the pci
> driver register call below.

What do you mean by "codebase"? You control this driver, just do all of
the logic in the probe() function, no need to do this in the module init
call.

> And if we log any error with dev_err() instead of pr_err() before the driver
> register.

Don't do that.

> That check was only for logging purposes, if done with dev_err(). I removed
> the check in v5.

Again, don't do it :)

>
> > > +
> > > + if (!zalloc_cpumask_var(&ne_cpu_pool.avail, GFP_KERNEL))
> > > + return -ENOMEM;
> > > +
> > > + mutex_init(&ne_cpu_pool.mutex);
> > > +
> > > + rc = pci_register_driver(&ne_pci_driver);
> > Nice, you did it right here, but why the above crazy test?
> >
> > > + if (rc < 0) {
> > > + dev_err(&pdev->dev,
> > > + "Error in pci register driver [rc=%d]\n", rc);
> > > +
> > > + goto free_cpumask;
> > > + }
> > > +
> > > + return 0;
> > You leaked a reference on that pci device, didn't you? Not good :(
>
> Yes, the pci get device call needs its pair - pci_dev_put(). I added it here
> and for the other occurrences where it was missing.

Again, just don't do it and then you don't have to worry about any of
this.

thanks,

greg k-h

\
 
 \ /
  Last update: 2020-06-30 10:06    [W:0.146 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site