lkml.org 
[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/7] Add initial Keem Bay SoC / Board support
From
Date
On Tue, 2020-06-16 at 16:56 +0100, Daniele Alessandrelli wrote:
> Hi,
>
> This patch-set adds initial support for a new Intel Movidius SoC
> code-named
> Keem Bay. The SoC couples an ARM Cortex A53 CPU with an Intel
> Movidius VPU.
>
> This initial patch-set enables only the minimal set of components
> required to
> make the Keem Bay EVM board boot into initramfs.
>
> Brief summary of the patch-set:
> * Patches 1-2 add the Keem Bay SCMI Mailbox driver (needed to enable
> SCMI in
> Keem Bay)
> * Patch 3 adds the ARCH_KEEMBAY config option
> * Patches 4-7 add minimal device tree for Keem Bay SoC and Keem Bay
> EVM
> (together with information about the SoC maintainers)
>
> Regards,
> Daniele
>
>
> Daniele Alessandrelli (5):
> arm64: Add config for Keem Bay SoC
> dt-bindings: arm: Add Keem Bay bindings
> MAINTAINERS: Add maintainers for Keem Bay SoC
> arm64: dts: keembay: Add device tree for Keem Bay SoC
> arm64: dts: keembay: Add device tree for Keem Bay EVM board
>
> Paul Murphy (2):
> dt-bindings: mailbox: Add Keem Bay SCMI mailbox bindings
> mailbox: keembay-scmi-mailbox: Add support for Keem Bay mailbox
>
> .../devicetree/bindings/arm/keembay.yaml | 19 ++
> .../mailbox/intel,keembay-scmi-mailbox.yaml | 44 ++++
> MAINTAINERS | 16 ++
> arch/arm64/Kconfig.platforms | 5 +
> arch/arm64/boot/dts/intel/Makefile | 1 +
> arch/arm64/boot/dts/intel/keembay-evm.dts | 55 +++++
> arch/arm64/boot/dts/intel/keembay-soc.dtsi | 172 +++++++++++++++
> drivers/mailbox/Kconfig | 9 +
> drivers/mailbox/Makefile | 2 +
> drivers/mailbox/keembay-scmi-mailbox.c | 203
> ++++++++++++++++++
> include/dt-bindings/clock/keembay-clocks.h | 188 ++++++++++++++++
> include/dt-bindings/power/keembay-power.h | 19 ++
> 12 files changed, 733 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/arm/keembay.yaml
> create mode 100644
> Documentation/devicetree/bindings/mailbox/intel,keembay-scmi-
> mailbox.yaml
> create mode 100644 arch/arm64/boot/dts/intel/keembay-evm.dts
> create mode 100644 arch/arm64/boot/dts/intel/keembay-soc.dtsi
> create mode 100644 drivers/mailbox/keembay-scmi-mailbox.c
> create mode 100644 include/dt-bindings/clock/keembay-clocks.h
> create mode 100644 include/dt-bindings/power/keembay-power.h
>

Ping



\
 
 \ /
  Last update: 2020-06-30 09:08    [W:0.183 / U:1.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site