lkml.org 
[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 00/10] Netronix embedded controller driver for Kobo and Tolino ebook readers
On Tue, 30 Jun 2020 09:15:23 +0200
Jonathan Neuschäfer <j.neuschaefer@gmx.net> wrote:

> On Tue, Jun 30, 2020 at 08:40:51AM +0200, Andreas Kemnade wrote:
> [...]
> > got a chance to test it on a Tolino Shine 2 HD.
> > It uses the RTC from the RC5T619 but backlight seems to go via MSP430
> > EC.
> >
> > I got this.
> >
> > [ 1.453603] ntxec 0-0043: Netronix embedded controller version f110 detected.
> > [ 10.723638] ntxec-rtc 21a0000.i2c:embedded-controller@43:rtc: registered as rtc0
> > [ 10.775276] ntxec-pwm: probe of 21a0000.i2c:embedded-controller@43:pwm failed with error -5
>
> Hmm, -EIO from the PWM driver.
>
turing debugging on:

[ 330.330599] i2c i2c-0: <i2c_imx_xfer_common>
[ 330.330621] i2c i2c-0: <i2c_imx_start>
[ 330.332927] i2c i2c-0: <i2c_imx_bus_busy>
[ 330.332953] i2c i2c-0: <i2c_imx_xfer_common> transfer message: 0
[ 330.332971] i2c i2c-0: <i2c_imx_write> write slave address: addr=0x86
[ 330.334365] i2c i2c-0: <i2c_imx_trx_complete> TRX complete
[ 330.334386] i2c i2c-0: <i2c_imx_acked> ACK received
[ 330.334402] i2c i2c-0: <i2c_imx_write> write data
[ 330.334420] i2c i2c-0: <i2c_imx_write> write byte: B0=0xA3
[ 330.334756] i2c i2c-0: <i2c_imx_trx_complete> TRX complete
[ 330.334774] i2c i2c-0: <i2c_imx_acked> ACK received
[ 330.334790] i2c i2c-0: <i2c_imx_write> write byte: B1=0x0
[ 330.351573] i2c i2c-0: <i2c_imx_trx_complete> TRX complete
[ 330.351598] i2c i2c-0: <i2c_imx_acked> No ACK
[ 330.351613] i2c i2c-0: <i2c_imx_stop>
[ 330.351629] i2c i2c-0: <i2c_imx_bus_busy>
[ 330.351648] i2c i2c-0: <i2c_imx_xfer_common> exit with: error: -6
[ 330.351690] i2c i2c-0: <i2c_imx_xfer_common>
[ 330.351704] i2c i2c-0: <i2c_imx_start>
[ 330.352297] i2c i2c-0: <i2c_imx_bus_busy>
[ 330.352321] i2c i2c-0: <i2c_imx_xfer_common> transfer message: 0
[ 330.352339] i2c i2c-0: <i2c_imx_write> write slave address: addr=0x86
[ 330.362152] i2c i2c-0: <i2c_imx_trx_complete> TRX complete
[ 330.362176] i2c i2c-0: <i2c_imx_acked> ACK received
[ 330.362191] i2c i2c-0: <i2c_imx_write> write data
[ 330.362208] i2c i2c-0: <i2c_imx_write> write byte: B0=0xA1
[ 330.362442] i2c i2c-0: <i2c_imx_trx_complete> TRX complete
[ 330.362461] i2c i2c-0: <i2c_imx_acked> ACK received
[ 330.362479] i2c i2c-0: <i2c_imx_write> write byte: B1=0xFF
[ 330.362686] i2c i2c-0: <i2c_imx_trx_complete> TRX complete
[ 330.362705] i2c i2c-0: <i2c_imx_acked> No ACK
[ 330.362720] i2c i2c-0: <i2c_imx_stop>
[ 330.362735] i2c i2c-0: <i2c_imx_bus_busy>
[ 330.362753] i2c i2c-0: <i2c_imx_xfer_common> exit with: error: -6
[ 330.362794] i2c i2c-0: <i2c_imx_xfer_common>
[ 330.362808] i2c i2c-0: <i2c_imx_start>
[ 330.363071] i2c i2c-0: <i2c_imx_bus_busy>
[ 330.363094] i2c i2c-0: <i2c_imx_xfer_common> transfer message: 0
[ 330.363112] i2c i2c-0: <i2c_imx_write> write slave address: addr=0x86
[ 330.363313] i2c i2c-0: <i2c_imx_trx_complete> TRX complete
[ 330.363331] i2c i2c-0: <i2c_imx_acked> ACK received
[ 330.363346] i2c i2c-0: <i2c_imx_write> write data
[ 330.363362] i2c i2c-0: <i2c_imx_write> write byte: B0=0xA2
[ 330.363572] i2c i2c-0: <i2c_imx_trx_complete> TRX complete
[ 330.363591] i2c i2c-0: <i2c_imx_acked> ACK received
[ 330.363608] i2c i2c-0: <i2c_imx_write> write byte: B1=0xFF
[ 330.363822] i2c i2c-0: <i2c_imx_trx_complete> TRX complete
[ 330.363841] i2c i2c-0: <i2c_imx_acked> No ACK
[ 330.363854] i2c i2c-0: <i2c_imx_stop>
[ 330.363869] i2c i2c-0: <i2c_imx_bus_busy>
[ 330.363886] i2c i2c-0: <i2c_imx_xfer_common> exit with: error: -6

Regards,
Andreas

\
 
 \ /
  Last update: 2020-06-30 22:15    [W:0.245 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site