lkml.org 
[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 13/14] arm64: Add fixup routines for usercopy store exceptions
Date
This adds the fixup routines for exceptions that occur on store
operations while copying, by providing the calling code with a more
accurate value for the number of bytes that failed to copy, rather
than returning the full buffer width.

The three routines for store exceptions work together to analyse
the position of the fault relative to the start or the end of the
buffer, and backtrack from the optimized memcpy algorithm to
determine if some number of bytes has already been successfully
copied.

The store operations occur mostly in-order, with the exception of
a few copy size ranges - this is specific to the new copy template,
which uses the latest memcpy implementation.

Signed-off-by: Oliver Swede <oli.swede@arm.com>
---
arch/arm64/lib/copy_user_fixup.S | 217 ++++++++++++++++++++++++++++++-
1 file changed, 215 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/lib/copy_user_fixup.S b/arch/arm64/lib/copy_user_fixup.S
index ae94b492129d..37ca3d99a02a 100644
--- a/arch/arm64/lib/copy_user_fixup.S
+++ b/arch/arm64/lib/copy_user_fixup.S
@@ -169,12 +169,225 @@ addr .req x15
*/
b L(end_fixup)

+/*
+ * The following three routines are directed to from faults
+ * on store instructions.
+ */
9996:
+ /*
+ * This routine is reached from faults on store instructions
+ * where the target address has been specified relative to the
+ * start of the user space memory buffer, and is also not
+ * guaranteed to be 16-byte aligned.
+ *
+ * For copy sizes <= 128 bytes, the stores occur in-order,
+ * so it has copied up to (addr-dst)&~15.
+ * For copy sizes > 128 bytes, this should only be directed
+ * to from a fault on the first store of the long copy, before
+ * the algorithm aligns dst to 16B, so no bytes have copied at
+ * this point.
+ */
+
+ /* Retrieve original params from stack */
+ ldr dst, [sp], #16 // dst: x3, src: x1
+ ldr count, [sp], #16 // count: x2
+ add srcend, src, count
+ add dstend, dst, count
+
+ /* count <= 3 -> count - (addr-dst) */
+ cmp count, 3
+ sub x0, addr, dst // relative fault offset in buffer
+ sub x0, count, x0 // bytes yet to copy
+ b.le L(end_fixup)
+ /* 3 < count <= 32 -> count - (addr-dst) */
+ cmp count, 32
+ b.le L(none_copied)
+ /* 32 < count < 128 -> count - ((addr-dst)&15) */
+ cmp count, 128
+ sub x0, addr, dst // relative fault offset
+ bic x0, x0, 15 // bytes already copied (steps of 16B stores)
+ sub x0, count, x0 // bytes yet to copy
+ b.le L(end_fixup)
+ /* 128 < count -> count */
+ b L(none_copied)
+
9997:
+ /*
+ * This routine is reached from faults on store instructions
+ * where the target address has been specified relative to
+ * the end of the user space memory buffer and is also not
+ * guaranteed to be 16-byte aligned.
+ *
+ * In this scenario, the copy is close to completion and
+ * has occurred in-order, so it is straightforward to
+ * calculate the remaining bytes.
+ *
+ * The algorithm increments dst by 64B for each loop64()
+ * subroutine, and tmp1 stores its latest value, which
+ * allows for the calculation of a threshold that it has
+ * copied up to.
+ *
+ * To account for faults on data that has already been copied
+ * (which can occur due to the way the algorithm uses
+ * overlapping copies within a buffer), this threshold can be
+ * subtracted from the copy size and the result compared
+ * against the remaining bytes after the fault offset in the
+ * last 64B; the minimum of the two can then be taken for the
+ * return value.
+ */
+
+ /* Save the current (adjusted) dst for later restoration */
+ mov tmp1, dst
+
+ /* Retrieve original params from stack */
+ ldp dst, src, [sp], #16 // dst: x3, src: x1
+ ldr count, [sp], #16 // count: x2
+ add srcend, src, count
+ add dstend, dst, count
+
+ /*
+ * Overlapping buffers:
+ * (src <= dst && dst < srcend) || (dst <= src && src < dstend)
+ */
+ cmp src, dst
+ ccmp dst, srcend, #0, le
+ b.lt L(none_copied)
+ cmp dst, src
+ ccmp src, dstend, #0, le
+ b.lt L(none_copied)
+
+ /*
+ * For copy size >128 bytes, select max of
+ * { tmp1-dst+80, ((addr-dstend+64)&15) }
+ */
+ sub tmp1, tmp1, dst // relative position of new dst
+ add tmp1, tmp1, 80 // copied up to here
+ sub tmp1, count, tmp1 // remaining bytes after non-overlapping section
+ sub x0, dstend, 64
+ sub x0, addr, x0
+ bic x0, x0, 15 // fault offset within dest. buffer
+ add x0, dstend, x0
+ sub x0, x0, 64
+ sub x0, dstend, x0 // remaining bytes in final (overlapping) 64B
+ cmp x0, tmp1
+ csel x0, x0, tmp1, lt
+ cmp count, 128
+ b.gt L(end_fixup)
+
+ cmp count, 2
+ b.le L(none_copied)
+ cmp count, 3 // one byte left
+ mov x0, 1
+ b.eq L(end_fixup)
+ cmp count, 7 // four bytes left
+ sub x0, count, 4
+ b.le L(end_fixup)
+ cmp count, 15 // eight bytes left
+ sub x0, count, 8
+ b.le L(end_fixup)
+ cmp count, 32 // 16 bytes left
+ sub x0, count, 16
+ b.le L(end_fixup)
+ /*
+ * For copy size 33..64 select min of
+ * {(32 - fault_offset), (count-32)}
+ * as copy may overlap
+ */
+ sub tmp1, dstend, 32
+ sub tmp1, addr, tmp1
+ bic tmp1, tmp1, 15
+ mov x0, 32
+ sub tmp1, x0, tmp1
+ sub x0, count, 32
+ cmp x0, tmp1
+ csel x0, x0, tmp1, lt
+ cmp count, 64
+ b.le L(end_fixup)
+ /* For copy size 65..96 select min of
+ * {(count - fault_offset), (count-64)}
+ * as copy may overlap
+ */
+ sub tmp1, dstend, 32
+ sub tmp1, addr, tmp1
+ bic tmp1, tmp1, 15
+ mov x0, 32
+ sub tmp1, x0, tmp1
+ sub x0, count, 64
+ cmp x0, tmp1
+ csel x0, x0, tmp1, lt
+ cmp count, 96
+ b.lt L(end_fixup)
+ /*
+ * For copy size 97..128 same as above, but account for
+ * out-of-order initial stores, where no bytes have been
+ * copied on those faults
+ */
+ sub tmp1, dstend, 64
+ sub tmp1, addr, tmp1
+ bic tmp1, tmp1, 15
+ mov x0, 64
+ sub tmp1, x0, tmp1
+ cmp count, 128
+ mov x0, 32
+ ccmp tmp1, x0, #0, le
+ b.gt L(none_copied) // none copied if faults in first or second chunk
+ sub x0, count, 64
+ cmp x0, tmp1
+ csel x0, x0, tmp1, lt
+ cmp count, 128
+ b.le L(end_fixup)
+
+ b L(none_copied)
+
9998:
- /* Retrieve info from stack */
+ /*
+ * This routine is reached from faults on store instructions
+ * where the target address has been specified relative to the
+ * start of the user space memory buffer, and is also
+ * guaranteed to be 16-byte aligned.
+ *
+ * These instrucions occur after the algorithm aligns dst
+ * to 16B, which is after the very first store in a long copy.
+ * It then continues copying from dst+16 onwards.
+ *
+ * This could result in the second store attempting to copy
+ * data that has already been copied, as there would be an
+ * overlap in the buffer if the original dst is not 16 bytes
+ * aligned. In this case we report that 16 bytes has already
+ * already been copied, so it must take the minimum of the
+ * two values.
+ */
+
+ /* Retrieve original params from stack */
+ ldp dst, src, [sp], #16 // dst: x3, src: x1
ldr count, [sp], #16 // count: x2
- add sp, sp, 32
+ add srcend, src, count
+ add dstend, dst, count
+
+ /*
+ * Overlapping buffers:
+ * (src <= dst && dst < srcend) || (dst <= src && src < dstend)
+ */
+ cmp src, dst
+ ccmp dst, srcend, #0, le
+ b.lt L(none_copied)
+ cmp dst, src
+ ccmp src, dstend, #0, le
+ b.lt L(none_copied)
+
+ /* Take the min from {16,(fault_addr&15)-(dst&15)}
+ * and subtract from count to obtain the return value */
+ bic tmp1, dst, 15 // aligned dst
+ bic x0, addr, 15
+ sub x0, x0, tmp1 // relative fault offset
+ cmp x0, 16
+ bic x0, addr, 15
+ sub x0, x0, dst
+ sub x0, count, x0
+ b.gt L(end_fixup)
+ sub x0, count, 16
+ b L(end_fixup) // initial unaligned chunk copied
+
L(none_copied):
/*
* Return the initial count as the number
--
2.17.1
\
 
 \ /
  Last update: 2020-06-30 21:49    [W:0.103 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site