lkml.org 
[lkml]   [2020]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC 0/4] regulator: lp87565: ignore ENx pins and add LP87524-Q1
Date
Hi,

the first patch in this series is a small but significant variation in how
the lp87565 driver enables the output rails, allow the kernel to always
know when it is enabling an output. However it can change existing
behaviour (depending on the hardware setup) and thus it should be carefully
evaluated.

The following patches are a fairly straightforward addition of a new chip
variant along with some DT bindings cleanup.

Luca

Luca Ceresoli (4):
regulator: lp87565: enable voltage regardless of ENx pin
regulator: lp87565: dt: remove duplicated section
regulator: lp87565: dt: add LP87524-Q1 variant
regulator: lp87565: add LP87524-Q1 variant

.../devicetree/bindings/mfd/lp87565.txt | 66 ++++++++++++++-----
drivers/mfd/lp87565.c | 4 ++
drivers/regulator/lp87565-regulator.c | 21 +++++-
include/linux/mfd/lp87565.h | 1 +
4 files changed, 73 insertions(+), 19 deletions(-)

--
2.27.0

\
 
 \ /
  Last update: 2020-06-03 22:04    [W:0.131 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site