lkml.org 
[lkml]   [2020]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] lan743x: Added fixed link and RGMII support / debugging
From
Date
Ok, let's proceed :) The code runs well, dmesg looks good, ip addr shows me a link up, speed/duplex looks ok. But it does not transfer any data.

Debugging steps (A/B versions):
- Check clocks with oscilloscope (10/100/1000)
- Dump actual register settings
- Trace Phy-Phy autonegotiation and ensure that our patch catches up the result

Research topic:
I will also look if in my test hardware uses distinct MDIO traces or in-band MDIO (MDIO via MII). Would inband MDIO need the autosense feature to talk to the phy before phy-phy auto negotiation is complete ? E.g. for triggering phy-phy autoneg ? And is this (inband mdio) maybe the reason why the may-phy autosense feature exists in the silicon ?

Thanks,
Roelof

> Am 03.06.2020 um 17:59 schrieb Andrew Lunn <andrew@lunn.ch>:
>
> On Wed, Jun 03, 2020 at 04:52:32PM +0200, Roelof Berg wrote:
>> TEST REPORT: BROKEN PATCH
>>
>> Thanks to everyone for working on the fixed link feature of lan743x eth driver.
>>
>
>> I received more test hardware today, and one piece of hardware
>> (EVBlan7430) becomes incompatible by the patch. We need to roll back
>> for now. Sorry.
>
> Hi Roelof
>
> We have a bit of time to fix this, before it becomes too critical.
> So lets try to fix it.
>
> How did it break?
>
> Thanks
> Andrew
>

\
 
 \ /
  Last update: 2020-06-03 18:34    [W:0.153 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site