lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] dt-bindings: backlight: Convert common backlight bindings to DT schema
On Fri, Jun 19, 2020 at 3:53 PM Sam Ravnborg <sam@ravnborg.org> wrote:
>
> Hi Rob.
>
> Good to have these converted. A few comments in the following. One
> comment is for the backlight people as you copied the original text.
>
> Sam
>
> On Thu, Jun 18, 2020 at 04:44:13PM -0600, Rob Herring wrote:
> > Convert the common GPIO, LED, and PWM backlight bindings to DT schema
> > format.
> >
> > Given there's only 2 common properties and the descriptions are slightly
> > different, I opted to not create a common backlight schema.
> >
> > Cc: Lee Jones <lee.jones@linaro.org>
> > Cc: Daniel Thompson <daniel.thompson@linaro.org>
> > Cc: Jingoo Han <jingoohan1@gmail.com>
> > Signed-off-by: Rob Herring <robh@kernel.org>
> > ---
> > .../leds/backlight/gpio-backlight.txt | 16 ---
> > .../leds/backlight/gpio-backlight.yaml | 41 ++++++++
> > .../bindings/leds/backlight/led-backlight.txt | 28 ------
> > .../leds/backlight/led-backlight.yaml | 58 +++++++++++
> > .../bindings/leds/backlight/pwm-backlight.txt | 61 ------------
> > .../leds/backlight/pwm-backlight.yaml | 98 +++++++++++++++++++
> > 6 files changed, 197 insertions(+), 105 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt
> > create mode 100644 Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > delete mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> > create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
> > delete mode 100644 Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
> > create mode 100644 Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt
> > deleted file mode 100644
> > index 321be6640533..000000000000
> > --- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt
> > +++ /dev/null
> > @@ -1,16 +0,0 @@
> > -gpio-backlight bindings
> > -
> > -Required properties:
> > - - compatible: "gpio-backlight"
> > - - gpios: describes the gpio that is used for enabling/disabling the backlight.
> > - refer to bindings/gpio/gpio.txt for more details.
> > -
> > -Optional properties:
> > - - default-on: enable the backlight at boot.
> > -
> > -Example:
> > - backlight {
> > - compatible = "gpio-backlight";
> > - gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
> > - default-on;
> > - };
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > new file mode 100644
> > index 000000000000..75cc569b9c55
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > @@ -0,0 +1,41 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: gpio-backlight bindings
> > +
> > +maintainers:
> > + - Lee Jones <lee.jones@linaro.org>
> > + - Daniel Thompson <daniel.thompson@linaro.org>
> > + - Jingoo Han <jingoohan1@gmail.com>
> > +
> > +properties:
> > + compatible:
> > + const: gpio-backlight
> > +
> > + gpios:
> > + description: The gpio that is used for enabling/disabling the backlight.
> > + maxItems: 1
> > +
> > + default-on:
> > + description: enable the backlight at boot.
> > + type: boolean
> > +
> > +required:
> > + - compatible
> > + - gpios
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > + backlight {
> > + compatible = "gpio-backlight";
> > + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
> > + default-on;
> > + };
> > +
> > +...
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> > deleted file mode 100644
> > index 4c7dfbe7f67a..000000000000
> > --- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> > +++ /dev/null
> > @@ -1,28 +0,0 @@
> > -led-backlight bindings
> > -
> > -This binding is used to describe a basic backlight device made of LEDs.
> > -It can also be used to describe a backlight device controlled by the output of
> > -a LED driver.
> > -
> > -Required properties:
> > - - compatible: "led-backlight"
> > - - leds: a list of LEDs
> > -
> > -Optional properties:
> > - - brightness-levels: Array of distinct brightness levels. The levels must be
> > - in the range accepted by the underlying LED devices.
> > - This is used to translate a backlight brightness level
> > - into a LED brightness level. If it is not provided, the
> > - identity mapping is used.
> > -
> > - - default-brightness-level: The default brightness level.
> > -
> > -Example:
> > -
> > - backlight {
> > - compatible = "led-backlight";
> > -
> > - leds = <&led1>, <&led2>;
> > - brightness-levels = <0 4 8 16 32 64 128 255>;
> > - default-brightness-level = <6>;
> > - };
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
> > new file mode 100644
> > index 000000000000..ae50945d2798
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
> > @@ -0,0 +1,58 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: led-backlight bindings
> > +
> > +maintainers:
> > + - Lee Jones <lee.jones@linaro.org>
> > + - Daniel Thompson <daniel.thompson@linaro.org>
> > + - Jingoo Han <jingoohan1@gmail.com>
> > +
> > +description:
> > + This binding is used to describe a basic backlight device made of LEDs. It
> > + can also be used to describe a backlight device controlled by the output of
> > + a LED driver.
> > +
> > +properties:
> > + compatible:
> > + const: led-backlight
> > +
> > + leds:
> > + description: A list of LED nodes
> > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > +
> > + brightness-levels:
> > + description: Array of distinct brightness levels. The levels must be
> > + in the range accepted by the underlying LED devices. This is used
> > + to translate a backlight brightness level into a LED brightness level.
> > + If it is not provided, the identity mapping is used.
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
> bike-shedding. To me it is a tad easier to read when multi-line
> descriptions are on a separate line.
> So "description:" on one line, and the text on following lines.
> example-schema.yaml does both - so both are official acceptable.

I agree, but the one issue is ruamel yaml wants it the above way
unless you do '|' (or really '>' may be the correct annotation here).
That's mainly an issue if doing tree wide yaml->python
processing->yaml transformations. But if the line lengths don't match
exactly what ruamel is set to, then it reformats it anyways, so in the
end it doesn't really matter. I just have to filter out unwanted
reformatting (until ruamel can really do roundtrips with no
reformatting).

Rob

\
 
 \ /
  Last update: 2020-06-29 21:38    [W:0.156 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site