lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFT 3/3] arm64: dts: exynos: Add unit address to soc node and move thermal zones on Exynos7
Date
Add @0 unit address to 'soc' node match its 'reg' property and move the
thermal zones out of 'soc' to main root as it this is usually not a
property of a Soc.

This silences DTC warnings:

Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Warning (simple_bus_reg): /soc/thermal-zones: missing or empty reg/ranges property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Not tested on HW.
---
arch/arm64/boot/dts/exynos/exynos7.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 300ad7326ea8..f590891efe25 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -83,7 +83,7 @@
method = "smc";
};

- soc: soc {
+ soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -597,15 +597,6 @@
#thermal-sensor-cells = <0>;
};

- thermal-zones {
- atlas_thermal: cluster0-thermal {
- polling-delay-passive = <0>; /* milliseconds */
- polling-delay = <0>; /* milliseconds */
- thermal-sensors = <&tmuctrl_0>;
- #include "exynos7-trip-points.dtsi"
- };
- };
-
ufs: ufs@15570000 {
compatible = "samsung,exynos7-ufs";
reg = <0x15570000 0x100>, /* 0: HCI standard */
@@ -675,6 +666,15 @@
};
};

+ thermal-zones {
+ atlas_thermal: cluster0-thermal {
+ polling-delay-passive = <0>; /* milliseconds */
+ polling-delay = <0>; /* milliseconds */
+ thermal-sensors = <&tmuctrl_0>;
+ #include "exynos7-trip-points.dtsi"
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
--
2.17.1
\
 
 \ /
  Last update: 2020-06-29 21:34    [W:0.071 / U:1.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site