lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 05/13] clk: qcom: gcc: remove unnecessary vco_table from SM8150
    Date
    The fixed alpha pll ops only use it for clamping in round_rate, which is
    unnecessary. This is consistent with SM8250 GCC not using vco_table.

    Signed-off-by: Jonathan Marek <jonathan@marek.ca>
    ---
    drivers/clk/qcom/gcc-sm8150.c | 10 ----------
    1 file changed, 10 deletions(-)

    diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
    index d7778def37da..8e9b5b3cceaf 100644
    --- a/drivers/clk/qcom/gcc-sm8150.c
    +++ b/drivers/clk/qcom/gcc-sm8150.c
    @@ -34,14 +34,8 @@ enum {
    P_SLEEP_CLK,
    };

    -static const struct pll_vco trion_vco[] = {
    - { 249600000, 2000000000, 0 },
    -};
    -
    static struct clk_alpha_pll gpll0 = {
    .offset = 0x0,
    - .vco_table = trion_vco,
    - .num_vco = ARRAY_SIZE(trion_vco),
    .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
    .clkr = {
    .enable_reg = 0x52000,
    @@ -85,8 +79,6 @@ static struct clk_alpha_pll_postdiv gpll0_out_even = {

    static struct clk_alpha_pll gpll7 = {
    .offset = 0x1a000,
    - .vco_table = trion_vco,
    - .num_vco = ARRAY_SIZE(trion_vco),
    .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
    .clkr = {
    .enable_reg = 0x52000,
    @@ -105,8 +97,6 @@ static struct clk_alpha_pll gpll7 = {

    static struct clk_alpha_pll gpll9 = {
    .offset = 0x1c000,
    - .vco_table = trion_vco,
    - .num_vco = ARRAY_SIZE(trion_vco),
    .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
    .clkr = {
    .enable_reg = 0x52000,
    --
    2.26.1
    \
     
     \ /
      Last update: 2020-06-29 20:39    [W:2.735 / U:0.480 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site