Messages in this thread | | | Subject | Re: [PATCH v3 04/17] arm64: dts: sc7180: Add OPP table for all qup devices | From | Rajendra Nayak <> | Date | Mon, 29 Jun 2020 16:54:48 +0530 |
| |
On 6/25/2020 8:47 PM, Matthias Kaehlcke wrote: > Hi Rajendra, > > On Tue, Apr 28, 2020 at 07:02:52PM +0530, Rajendra Nayak wrote: >> qup has a requirement to vote on the performance state of the CX domain >> in sc7180 devices. Add OPP tables for these and also add power-domains >> property for all qup instances. >> >> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> >> --- >> arch/arm64/boot/dts/qcom/sc7180.dtsi | 79 ++++++++++++++++++++++++++++++++++++ >> 1 file changed, 79 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi >> index 998f101..efba600 100644 >> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi >> @@ -417,6 +417,25 @@ >> status = "disabled"; >> }; >> >> + qup_opp_table: qup-opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-75000000 { >> + opp-hz = /bits/ 64 <75000000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + }; >> + >> + opp-100000000 { >> + opp-hz = /bits/ 64 <100000000>; >> + required-opps = <&rpmhpd_opp_svs>; >> + }; >> + >> + opp-128000000 { >> + opp-hz = /bits/ 64 <128000000>; >> + required-opps = <&rpmhpd_opp_nom>; >> + }; >> + }; >> + >> qupv3_id_0: geniqup@8c0000 { >> compatible = "qcom,geni-se-qup"; >> reg = <0 0x008c0000 0 0x6000>; > > > no entries for i2c0?
I have actually wrongly added them for some i2c instances, I need to drop all of them. geni i2c does not support dvfs, it just uses a fixed clock.
-- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
| |