lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.7 022/265] tcp: don't ignore ECN CWR on pure ACK
    Date
    From: Denis Kirjanov <kda@linux-powerpc.org>

    [ Upstream commit 2570284060b48f3f79d8f1a2698792f36c385e9a ]

    there is a problem with the CWR flag set in an incoming ACK segment
    and it leads to the situation when the ECE flag is latched forever

    the following packetdrill script shows what happens:

    // Stack receives incoming segments with CE set
    +0.1 <[ect0] . 11001:12001(1000) ack 1001 win 65535
    +0.0 <[ce] . 12001:13001(1000) ack 1001 win 65535
    +0.0 <[ect0] P. 13001:14001(1000) ack 1001 win 65535

    // Stack repsonds with ECN ECHO
    +0.0 >[noecn] . 1001:1001(0) ack 12001
    +0.0 >[noecn] E. 1001:1001(0) ack 13001
    +0.0 >[noecn] E. 1001:1001(0) ack 14001

    // Write a packet
    +0.1 write(3, ..., 1000) = 1000
    +0.0 >[ect0] PE. 1001:2001(1000) ack 14001

    // Pure ACK received
    +0.01 <[noecn] W. 14001:14001(0) ack 2001 win 65535

    // Since CWR was sent, this packet should NOT have ECE set

    +0.1 write(3, ..., 1000) = 1000
    +0.0 >[ect0] P. 2001:3001(1000) ack 14001
    // but Linux will still keep ECE latched here, with packetdrill
    // flagging a missing ECE flag, expecting
    // >[ect0] PE. 2001:3001(1000) ack 14001
    // in the script

    In the situation above we will continue to send ECN ECHO packets
    and trigger the peer to reduce the congestion window. To avoid that
    we can check CWR on pure ACKs received.

    v3:
    - Add a sequence check to avoid sending an ACK to an ACK

    v2:
    - Adjusted the comment
    - move CWR check before checking for unacknowledged packets

    Signed-off-by: Denis Kirjanov <denis.kirjanov@suse.com>
    Acked-by: Neal Cardwell <ncardwell@google.com>
    Signed-off-by: Eric Dumazet <edumazet@google.com>
    Signed-off-by: David S. Miller <davem@davemloft.net>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    ---
    net/ipv4/tcp_input.c | 14 +++++++++++---
    1 file changed, 11 insertions(+), 3 deletions(-)

    diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
    index 29c6fc8c77168..ccab8bc29e2b1 100644
    --- a/net/ipv4/tcp_input.c
    +++ b/net/ipv4/tcp_input.c
    @@ -261,7 +261,8 @@ static void tcp_ecn_accept_cwr(struct sock *sk, const struct sk_buff *skb)
    * cwnd may be very low (even just 1 packet), so we should ACK
    * immediately.
    */
    - inet_csk(sk)->icsk_ack.pending |= ICSK_ACK_NOW;
    + if (TCP_SKB_CB(skb)->seq != TCP_SKB_CB(skb)->end_seq)
    + inet_csk(sk)->icsk_ack.pending |= ICSK_ACK_NOW;
    }
    }

    @@ -3683,6 +3684,15 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
    tcp_in_ack_event(sk, ack_ev_flags);
    }

    + /* This is a deviation from RFC3168 since it states that:
    + * "When the TCP data sender is ready to set the CWR bit after reducing
    + * the congestion window, it SHOULD set the CWR bit only on the first
    + * new data packet that it transmits."
    + * We accept CWR on pure ACKs to be more robust
    + * with widely-deployed TCP implementations that do this.
    + */
    + tcp_ecn_accept_cwr(sk, skb);
    +
    /* We passed data and got it acked, remove any soft error
    * log. Something worked...
    */
    @@ -4780,8 +4790,6 @@ static void tcp_data_queue(struct sock *sk, struct sk_buff *skb)
    skb_dst_drop(skb);
    __skb_pull(skb, tcp_hdr(skb)->doff * 4);

    - tcp_ecn_accept_cwr(sk, skb);
    -
    tp->rx_opt.dsack = 0;

    /* Queue data for delivery to the user.
    --
    2.25.1
    \
     
     \ /
      Last update: 2020-06-30 00:10    [W:4.036 / U:0.048 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site