lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.7 129/265] ARM: dts: NSP: Correct FA2 mailbox node
Date
From: Matthew Hagan <mnhagan88@gmail.com>

[ Upstream commit ac4e106d8934a5894811fc263f4b03fc8ed0fb7a ]

The FA2 mailbox is specified at 0x18025000 but should actually be
0x18025c00, length 0x400 according to socregs_nsp.h and board_bu.c. Also
the interrupt was off by one and should be GIC SPI 151 instead of 150.

Fixes: 17d517172300 ("ARM: dts: NSP: Add mailbox (PDC) to NSP")
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 920c0f561e5ce..3175266ede646 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -259,10 +259,10 @@
status = "disabled";
};

- mailbox: mailbox@25000 {
+ mailbox: mailbox@25c00 {
compatible = "brcm,iproc-fa2-mbox";
- reg = <0x25000 0x445>;
- interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x25c00 0x400>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
--
2.25.1
\
 
 \ /
  Last update: 2020-06-30 00:07    [W:0.867 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site