lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 02/11] clk: sunxi-ng: add support for the Allwinner A100 CCU
On Mon, Jun 22, 2020 at 10:58:58AM +0800, Frank Lee wrote:
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
> + */
> +
> +#ifndef _CCU_SUN50IW10_R_H
> +#define _CCU_SUN50IW10_R_H
> +
> +#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
> +#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
> +
> +#define CLK_R_CPUS 0
> +#define CLK_R_AHB 1
> +
> +/* exported except APB1 for R_PIO */
> +
> +#define CLK_R_APB2 3
> +
> +#define CLK_NUMBER (CLK_R_AHB_BUS_RTC + 1)
> +
> +#endif /* _CCU_SUN50IW10_R_H */

You've been using the public name for all of the other header guards as
far as I can tell, it would be great to use it here too

> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100.c b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
> new file mode 100644
> index 0000000..57c6910
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
> @@ -0,0 +1,1261 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu_div.h"
> +#include "ccu_gate.h"
> +#include "ccu_mp.h"
> +#include "ccu_mult.h"
> +#include "ccu_nk.h"
> +#include "ccu_nkm.h"
> +#include "ccu_nkmp.h"
> +#include "ccu_nm.h"
> +
> +#include "ccu-sun50i-a100.h"
> +
> +/*
> + * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
> + * P should only be used for output frequencies lower than 288 MHz.
> + *
> + * For now we can just model it as a multiplier clock, and force P to /1.
> + *
> + * The M factor is present in the register's description, but not in the
> + * frequency formula, and it's documented as "M is only used for backdoor
> + * testing", so it's not modelled and then force to 0.
> + */
> +#define SUN50I_A100_PLL_CPUX_REG 0x000
> +static struct ccu_mult pll_cpux_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .common = {
> + .reg = 0x000,
> + .hw.init = CLK_HW_INIT("pll-cpux", "dcxo24M",
> + &ccu_mult_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
> +#define SUN50I_A100_PLL_DDR0_REG 0x010
> +static struct ccu_nkmp pll_ddr0_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .common = {
> + .reg = 0x010,
> + .hw.init = CLK_HW_INIT("pll-ddr0", "dcxo24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE |
> + CLK_IS_CRITICAL),
> + },
> +};
> +
> +#define SUN50I_A100_PLL_PERIPH0_REG 0x020
> +static struct ccu_nkmp pll_periph0_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .fixed_post_div = 2,
> + .common = {
> + .reg = 0x020,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-periph0", "dcxo24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_A100_PLL_PERIPH1_REG 0x028
> +static struct ccu_nkmp pll_periph1_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .fixed_post_div = 2,
> + .common = {
> + .reg = 0x028,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-periph1", "dcxo24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +#define SUN50I_A100_PLL_PERIPH1_PATTERN0_REG 0x128
> +
> +#define SUN50I_A100_PLL_GPU_REG 0x030
> +static struct ccu_nkmp pll_gpu_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .common = {
> + .reg = 0x030,
> + .hw.init = CLK_HW_INIT("pll-gpu", "dcxo24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +/*
> + * For Video PLLs, the output divider is described as "used for testing"
> + * in the user manual. So it's not modelled and forced to 0.
> + */
> +#define SUN50I_A100_PLL_VIDEO0_REG 0x040
> +static struct ccu_nm pll_video0_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .fixed_post_div = 4,
> + .common = {
> + .reg = 0x040,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-video0", "dcxo24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_A100_PLL_VIDEO1_REG 0x048
> +static struct ccu_nm pll_video1_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .fixed_post_div = 4,
> + .common = {
> + .reg = 0x048,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-video1", "dcxo24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_A100_PLL_VIDEO2_REG 0x050
> +static struct ccu_nm pll_video2_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .fixed_post_div = 4,
> + .common = {
> + .reg = 0x050,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-video2", "dcxo24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_A100_PLL_VE_REG 0x058
> +static struct ccu_nkmp pll_ve_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .common = {
> + .reg = 0x058,
> + .hw.init = CLK_HW_INIT("pll-ve", "dcxo24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +/*
> + * The COM PLL has m0 dividers in addition to the usual N, M
> + * factors. Since we only need 1 frequencies from this PLL: 45.1584 MHz,
> + * ignore it for now.
> + */
> +#define SUN50I_A100_PLL_COM_REG 0x060
> +static struct ccu_sdm_setting pll_com_sdm_table[] = {
> + { .rate = 451584000, .pattern = 0xc0014396, .m = 2, .n = 37 },
> +};
> +
> +static struct ccu_nm pll_com_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(0, 1),
> + .sdm = _SUNXI_CCU_SDM(pll_com_sdm_table, BIT(24),
> + 0x160, BIT(31)),
> + .common = {
> + .reg = 0x060,
> + .features = CCU_FEATURE_SIGMA_DELTA_MOD,
> + .hw.init = CLK_HW_INIT("pll-com", "dcxo24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_A100_PLL_VIDEO3_REG 0x068
> +static struct ccu_nm pll_video3_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .fixed_post_div = 4,
> + .common = {
> + .reg = 0x068,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-video3", "dcxo24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +/*
> + * The Audio PLL has m0, m1 dividers in addition to the usual N, M
> + * factors. Since we only need 4 frequencies from this PLL: 22.5792 MHz,
> + * 24.576 MHz, 90.3168MHz and 98.304MHz ignore them for now.
> + * Enforce the default for them, which is m0 = 1, m1 = 0.
> + */
> +#define SUN50I_A100_PLL_AUDIO_REG 0x078
> +static struct ccu_sdm_setting pll_audio_sdm_table[] = {
> + { .rate = 45158400, .pattern = 0xc001bcd3, .m = 18, .n = 33 },
> + { .rate = 49152000, .pattern = 0xc001eb85, .m = 20, .n = 40 },
> + { .rate = 180633600, .pattern = 0xc001288d, .m = 3, .n = 22 },
> + { .rate = 196608000, .pattern = 0xc001eb85, .m = 5, .n = 40 },
> +};
> +
> +static struct ccu_nm pll_audio_clk = {
> + .enable = BIT(27),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(16, 6),
> + .fixed_post_div = 2,
> + .sdm = _SUNXI_CCU_SDM(pll_audio_sdm_table, BIT(24),
> + 0x178, BIT(31)),
> + .common = {
> + .reg = 0x078,
> + .features = CCU_FEATURE_FIXED_POSTDIV |
> + CCU_FEATURE_SIGMA_DELTA_MOD,
> + .hw.init = CLK_HW_INIT("pll-audio", "dcxo24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +static const char * const cpux_parents[] = { "dcxo24M", "osc32k",
> + "iosc", "pll-cpux",
> + "pll-periph0" };
> +static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
> + 0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
> +static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
> +static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
> +
> +static const char * const psi_ahb1_ahb2_parents[] = { "dcxo24M", "osc32k",
> + "iosc", "pll-periph0",
> + "pll-periph0-2x" };
> +static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
> + psi_ahb1_ahb2_parents,
> + 0x510,
> + 0, 2, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + 0);
> +
> +static const char * const ahb3_apb1_apb2_parents[] = { "dcxo24M", "osc32k",
> + "psi-ahb1-ahb2",
> + "pll-periph0",
> + "pll-periph0-2x" };
> +static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
> + 0, 2, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
> + 0, 2, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
> + 0, 2, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + 0);
> +
> +static const char * const mbus_parents[] = { "dcxo24M", "pll-ddr0",
> + "pll-periph0",
> + "pll-periph0-2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
> + 0, 3, /* M */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + CLK_IS_CRITICAL);
> +
> +static const char * const de_parents[] = { "pll-com", "pll-periph0-2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de0", de_parents, 0x600,
> + 0, 4, /* M */
> + 24, 1, /* mux */
> + BIT(31), /* gate */
> + CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
> + 0x60c, BIT(0), 0);
> +
> +static const char * const g2d_parents[] = { "pll-com", "pll-periph0-2x",
> + "pll-video0-2x", "pll-video1-2x",
> + "pll-video2-2x"};
> +static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d",
> + g2d_parents,
> + 0x630,
> + 0, 4, /* M */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2",
> + 0x63c, BIT(0), 0);
> +
> +static const char * const gpu_parents[] = { "pll-gpu" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670,
> + 0, 2, /* M */
> + 24, 1, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
> + 0x67c, BIT(0), 0);
> +
> +static const char * const ce_parents[] = { "dcxo24M", "pll-periph0-2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 1, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
> + 0x68c, BIT(0), 0);
> +
> +static const char * const ve_parents[] = { "pll-ve" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
> + 0, 3, /* M */
> + 24, 1, /* mux */
> + BIT(31), /* gate */
> + CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
> + 0x69c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
> + 0x70c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2",
> + 0x71c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2",
> + 0x72c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
> + 0x73c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(avs_clk, "avs", "dcxo24M", 0x740, BIT(31), 0);
> +
> +static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
> + 0x78c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
> + 0x79c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
> + 0x804, BIT(0), 0);
> +static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
> + 0x804, BIT(1), 0);
> +static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
> + 0x804, BIT(2), 0);
> +static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
> + 0x804, BIT(5), 0);
> +static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus",
> + 0x804, BIT(8), 0);
> +static SUNXI_CCU_GATE(mbus_isp_clk, "mbus-isp", "mbus",
> + 0x804, BIT(9), 0);
> +static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus",
> + 0x804, BIT(10), 0);
> +
> +static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
> + 0x80c, BIT(0), CLK_IS_CRITICAL);
> +
> +static const char * const nand_spi_parents[] = { "dcxo24M",
> + "pll-periph0",
> + "pll-periph1",
> + "pll-periph0-2x",
> + "pll-periph1-2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
> +
> +static const char * const mmc_parents[] = { "dcxo24M", "pll-periph0-2x",
> + "pll-periph1-2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 2, /* post-div */
> + CLK_SET_RATE_NO_REPARENT);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 2, /* post-div */
> + CLK_SET_RATE_NO_REPARENT);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 2, /* post-div */
> + CLK_SET_RATE_NO_REPARENT);
> +
> +static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
> +
> +static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
> +static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0);
> +
> +static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", nand_spi_parents, 0x948,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb3", 0x96c, BIT(2), 0);
> +
> +static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970,
> + BIT(31) | BIT(30), 0);
> +
> +static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0);
> +
> +static const char * const ir_parents[] = { "osc32k", "iosc",
> + "pll-periph0", "pll-periph1" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ir_rx_clk, "ir-rx", ir_parents, 0x990,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_ir_rx_clk, "bus-ir-rx", "ahb3", 0x99c, BIT(0), 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_parents, 0x9c0,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_gpadc_clk, "bus-gpadc", "apb1", 0x9ec, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
> +
> +static const char * const audio_parents[] = { "pll-audio", "pll-com-audio" };
> +static struct ccu_div i2s0_clk = {
> + .enable = BIT(31),
> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> + .mux = _SUNXI_CCU_MUX(24, 2),
> + .common = {
> + .reg = 0xa10,
> + .hw.init = CLK_HW_INIT_PARENTS("i2s0",
> + audio_parents,
> + &ccu_div_ops,
> + CLK_SET_RATE_PARENT),
> + },
> +};
> +
> +static struct ccu_div i2s1_clk = {
> + .enable = BIT(31),
> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> + .mux = _SUNXI_CCU_MUX(24, 2),
> + .common = {
> + .reg = 0xa14,
> + .hw.init = CLK_HW_INIT_PARENTS("i2s1",
> + audio_parents,
> + &ccu_div_ops,
> + CLK_SET_RATE_PARENT),
> + },
> +};
> +
> +static struct ccu_div i2s2_clk = {
> + .enable = BIT(31),
> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> + .mux = _SUNXI_CCU_MUX(24, 2),
> + .common = {
> + .reg = 0xa18,
> + .hw.init = CLK_HW_INIT_PARENTS("i2s2",
> + audio_parents,
> + &ccu_div_ops,
> + CLK_SET_RATE_PARENT),
> + },
> +};
> +
> +static struct ccu_div i2s3_clk = {
> + .enable = BIT(31),
> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> + .mux = _SUNXI_CCU_MUX(24, 2),
> + .common = {
> + .reg = 0xa1c,
> + .hw.init = CLK_HW_INIT_PARENTS("i2s3",
> + audio_parents,
> + &ccu_div_ops,
> + CLK_SET_RATE_PARENT),
> + },
> +};
> +
> +static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa20, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa20, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa20, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa20, BIT(3), 0);
> +
> +static struct ccu_div spdif_clk = {
> + .enable = BIT(31),
> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> + .mux = _SUNXI_CCU_MUX(24, 2),
> + .common = {
> + .reg = 0xa24,
> + .hw.init = CLK_HW_INIT_PARENTS("spdif",
> + audio_parents,
> + &ccu_div_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
> +
> +static struct ccu_div dmic_clk = {
> + .enable = BIT(31),
> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> + .mux = _SUNXI_CCU_MUX(24, 2),
> + .common = {
> + .reg = 0xa40,
> + .hw.init = CLK_HW_INIT_PARENTS("dmic",
> + audio_parents,
> + &ccu_div_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_dac_clk, "audio-codec-dac",
> + audio_parents, 0xa50,
> + 0, 4, /* M */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_adc_clk, "audio-codec-adc",
> + audio_parents, 0xa54,
> + 0, 4, /* M */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x",
> + audio_parents, 0xa58,
> + 0, 4, /* M */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c,
> + BIT(0), 0);
> +
> +/*
> + * There are OHCI 12M clock source selection bits for 2 USB 2.0 ports.
> + * We will force them to 0 (12M divided from 48M).
> + */
> +#define SUN50I_A100_USB0_CLK_REG 0xa70
> +#define SUN50I_A100_USB1_CLK_REG 0xa74
> +
> +static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
> +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "dcxo24M", 0xa70, BIT(29), 0);
> +
> +static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0);
> +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "dcxo24M", 0xa74, BIT(29), 0);
> +
> +static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
> +static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
> +
> +static SUNXI_CCU_GATE(bus_lradc_clk, "bus-lradc", "ahb3", 0xa9c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_dpss_top0_clk, "bus-dpss-top0", "ahb3",
> + 0xabc, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_dpss_top1_clk, "bus-dpss-top1", "ahb3",
> + 0xacc, BIT(0), 0);
> +
> +static const char * const mipi_dsi_parents[] = { "dcxo24M", "pll-periph0-2x",
> + "pll-periph0" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi",
> + mipi_dsi_parents,
> + 0xb24,
> + 0, 4, /* M */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb3",
> + 0xb4c, BIT(0), 0);
> +
> +static const char * const tcon_lcd_parents[] = { "pll-video0-4x",
> + "pll-video1-4x",
> + "pll-video2-4x",
> + "pll-video3-4x",
> + "pll-periph0-2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_lcd_clk, "tcon-lcd0",
> + tcon_lcd_parents, 0xb60,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_tcon_lcd_clk, "bus-tcon-lcd0", "ahb3",
> + 0xb7c, BIT(0), 0);
> +
> +static const char * const ledc_parents[] = { "dcxo24M",
> + "pll-periph0" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ledc_clk, "ledc",
> + ledc_parents, 0xbf0,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_ledc_clk, "bus-ledc", "ahb3", 0xbfc, BIT(0), 0);
> +
> +static const char * const csi_top_parents[] = { "pll-periph0-2x",
> + "pll-video0-2x",
> + "pll-video1-2x",
> + "pll-video2-2x",
> + "pll-video3-2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi_top_clk, "csi-top",
> + csi_top_parents, 0xc04,
> + 0, 4, /* M */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const csi0_mclk_parents[] = { "dcxo24M", "pll-video2",
> + "pll-video3", "pll-video0",
> + "pll-video1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk",
> + csi0_mclk_parents, 0xc08,
> + 0, 5, /* M */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const csi1_mclk_parents[] = { "dcxo24M", "pll-video3",
> + "pll-video0", "pll-video1",
> + "pll-video2" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk",
> + csi1_mclk_parents, 0xc0c,
> + 0, 5, /* M */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc1c, BIT(0), 0);
> +
> +static const char * const csi_isp_parents[] = { "pll-periph0-2x",
> + "pll-video0-2x",
> + "pll-video1-2x",
> + "pll-video2-2x",
> + "pll-video3-2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi_isp_clk, "csi-isp",
> + csi_isp_parents, 0xc20,
> + 0, 5, /* M */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +/* Fixed factor clocks */
> +static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
> +
> +static CLK_FIXED_FACTOR_HW(pll_com_audio_clk, "pll-com-audio",
> + &pll_com_clk.common.hw,
> + 5, 1, CLK_SET_RATE_PARENT);
> +
> +static CLK_FIXED_FACTOR_HW(pll_periph0_2x_clk, "pll-periph0-2x",
> + &pll_periph0_clk.common.hw,
> + 1, 2, 0);
> +
> +static CLK_FIXED_FACTOR_HW(pll_periph1_2x_clk, "pll-periph1-2x",
> + &pll_periph1_clk.common.hw,
> + 1, 2, 0);
> +
> +static const struct clk_hw *pll_video0_parents[] = {
> + &pll_video0_clk.common.hw
> +};
> +static CLK_FIXED_FACTOR_HWS(pll_video0_4x_clk, "pll-video0-4x",
> + pll_video0_parents,
> + 1, 4, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HWS(pll_video0_2x_clk, "pll-video0-2x",
> + pll_video0_parents,
> + 1, 2, CLK_SET_RATE_PARENT);
> +
> +static const struct clk_hw *pll_video1_parents[] = {
> + &pll_video1_clk.common.hw
> +};
> +static CLK_FIXED_FACTOR_HWS(pll_video1_4x_clk, "pll-video1-4x",
> + pll_video1_parents,
> + 1, 4, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HWS(pll_video1_2x_clk, "pll-video1-2x",
> + pll_video1_parents,
> + 1, 2, CLK_SET_RATE_PARENT);
> +
> +static const struct clk_hw *pll_video2_parents[] = {
> + &pll_video2_clk.common.hw
> +};
> +static CLK_FIXED_FACTOR_HWS(pll_video2_4x_clk, "pll-video2-4x",
> + pll_video2_parents,
> + 1, 4, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HWS(pll_video2_2x_clk, "pll-video2-2x",
> + pll_video2_parents,
> + 1, 2, CLK_SET_RATE_PARENT);
> +
> +static const struct clk_hw *pll_video3_parents[] = {
> + &pll_video3_clk.common.hw
> +};
> +static CLK_FIXED_FACTOR_HWS(pll_video3_4x_clk, "pll-video3-4x",
> + pll_video3_parents,
> + 1, 4, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HWS(pll_video3_2x_clk, "pll-video3-2x",
> + pll_video3_parents,
> + 1, 2, CLK_SET_RATE_PARENT);
> +
> +static struct ccu_common *sun50i_a100_ccu_clks[] = {
> + &pll_cpux_clk.common,
> + &pll_ddr0_clk.common,
> + &pll_periph0_clk.common,
> + &pll_periph1_clk.common,
> + &pll_gpu_clk.common,
> + &pll_video0_clk.common,
> + &pll_video1_clk.common,
> + &pll_video2_clk.common,
> + &pll_video3_clk.common,
> + &pll_ve_clk.common,
> + &pll_com_clk.common,
> + &pll_audio_clk.common,
> + &cpux_clk.common,
> + &axi_clk.common,
> + &cpux_apb_clk.common,
> + &psi_ahb1_ahb2_clk.common,
> + &ahb3_clk.common,
> + &apb1_clk.common,
> + &apb2_clk.common,
> + &mbus_clk.common,
> + &de_clk.common,
> + &bus_de_clk.common,
> + &g2d_clk.common,
> + &bus_g2d_clk.common,
> + &gpu_clk.common,
> + &bus_gpu_clk.common,
> + &ce_clk.common,
> + &bus_ce_clk.common,
> + &ve_clk.common,
> + &bus_ve_clk.common,
> + &bus_dma_clk.common,
> + &bus_msgbox_clk.common,
> + &bus_spinlock_clk.common,
> + &bus_hstimer_clk.common,
> + &avs_clk.common,
> + &bus_dbg_clk.common,
> + &bus_psi_clk.common,
> + &bus_pwm_clk.common,
> + &bus_iommu_clk.common,
> + &mbus_dma_clk.common,
> + &mbus_ve_clk.common,
> + &mbus_ce_clk.common,
> + &mbus_nand_clk.common,
> + &mbus_csi_clk.common,
> + &mbus_isp_clk.common,
> + &mbus_g2d_clk.common,
> + &bus_dram_clk.common,
> + &nand0_clk.common,
> + &nand1_clk.common,
> + &bus_nand_clk.common,
> + &mmc0_clk.common,
> + &mmc1_clk.common,
> + &mmc2_clk.common,
> + &bus_mmc0_clk.common,
> + &bus_mmc1_clk.common,
> + &bus_mmc2_clk.common,
> + &bus_uart0_clk.common,
> + &bus_uart1_clk.common,
> + &bus_uart2_clk.common,
> + &bus_uart3_clk.common,
> + &bus_uart4_clk.common,
> + &bus_i2c0_clk.common,
> + &bus_i2c1_clk.common,
> + &bus_i2c2_clk.common,
> + &bus_i2c3_clk.common,
> + &spi0_clk.common,
> + &spi1_clk.common,
> + &spi2_clk.common,
> + &bus_spi0_clk.common,
> + &bus_spi1_clk.common,
> + &bus_spi2_clk.common,
> + &emac_25m_clk.common,
> + &bus_emac_clk.common,
> + &ir_rx_clk.common,
> + &bus_ir_rx_clk.common,
> + &ir_tx_clk.common,
> + &bus_ir_tx_clk.common,
> + &bus_gpadc_clk.common,
> + &bus_ths_clk.common,
> + &i2s0_clk.common,
> + &i2s1_clk.common,
> + &i2s2_clk.common,
> + &i2s3_clk.common,
> + &bus_i2s0_clk.common,
> + &bus_i2s1_clk.common,
> + &bus_i2s2_clk.common,
> + &bus_i2s3_clk.common,
> + &spdif_clk.common,
> + &bus_spdif_clk.common,
> + &dmic_clk.common,
> + &bus_dmic_clk.common,
> + &audio_codec_dac_clk.common,
> + &audio_codec_adc_clk.common,
> + &audio_codec_4x_clk.common,
> + &bus_audio_codec_clk.common,
> + &usb_ohci0_clk.common,
> + &usb_phy0_clk.common,
> + &usb_ohci1_clk.common,
> + &usb_phy1_clk.common,
> + &bus_ohci0_clk.common,
> + &bus_ohci1_clk.common,
> + &bus_ehci0_clk.common,
> + &bus_ehci1_clk.common,
> + &bus_otg_clk.common,
> + &bus_lradc_clk.common,
> + &bus_dpss_top0_clk.common,
> + &bus_dpss_top1_clk.common,
> + &mipi_dsi_clk.common,
> + &bus_mipi_dsi_clk.common,
> + &tcon_lcd_clk.common,
> + &bus_tcon_lcd_clk.common,
> + &ledc_clk.common,
> + &bus_ledc_clk.common,
> + &csi_top_clk.common,
> + &csi0_mclk_clk.common,
> + &csi1_mclk_clk.common,
> + &bus_csi_clk.common,
> + &csi_isp_clk.common,
> +};
> +
> +static struct clk_hw_onecell_data sun50i_a100_hw_clks = {
> + .hws = {
> + [CLK_OSC12M] = &osc12M_clk.hw,
> + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
> + [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
> + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
> + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
> + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
> + [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
> + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
> + [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
> + [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
> + [CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw,
> + [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
> + [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
> + [CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw,
> + [CLK_PLL_VIDEO2] = &pll_video2_clk.common.hw,
> + [CLK_PLL_VIDEO2_2X] = &pll_video2_2x_clk.hw,
> + [CLK_PLL_VIDEO2_4X] = &pll_video2_4x_clk.hw,
> + [CLK_PLL_VIDEO3] = &pll_video3_clk.common.hw,
> + [CLK_PLL_VIDEO3_2X] = &pll_video3_2x_clk.hw,
> + [CLK_PLL_VIDEO3_4X] = &pll_video3_4x_clk.hw,
> + [CLK_PLL_VE] = &pll_ve_clk.common.hw,
> + [CLK_PLL_COM] = &pll_com_clk.common.hw,
> + [CLK_PLL_COM_AUDIO] = &pll_com_audio_clk.hw,
> + [CLK_PLL_AUDIO] = &pll_audio_clk.common.hw,
> + [CLK_CPUX] = &cpux_clk.common.hw,
> + [CLK_AXI] = &axi_clk.common.hw,
> + [CLK_CPUX_APB] = &cpux_apb_clk.common.hw,
> + [CLK_PSI_AHB1_AHB2] = &psi_ahb1_ahb2_clk.common.hw,
> + [CLK_AHB3] = &ahb3_clk.common.hw,
> + [CLK_APB1] = &apb1_clk.common.hw,
> + [CLK_APB2] = &apb2_clk.common.hw,
> + [CLK_MBUS] = &mbus_clk.common.hw,
> + [CLK_DE] = &de_clk.common.hw,
> + [CLK_BUS_DE] = &bus_de_clk.common.hw,
> + [CLK_G2D] = &g2d_clk.common.hw,
> + [CLK_BUS_G2D] = &bus_g2d_clk.common.hw,
> + [CLK_GPU] = &gpu_clk.common.hw,
> + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
> + [CLK_CE] = &ce_clk.common.hw,
> + [CLK_BUS_CE] = &bus_ce_clk.common.hw,
> + [CLK_VE] = &ve_clk.common.hw,
> + [CLK_BUS_VE] = &bus_ve_clk.common.hw,
> + [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
> + [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
> + [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
> + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
> + [CLK_AVS] = &avs_clk.common.hw,
> + [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
> + [CLK_BUS_PSI] = &bus_psi_clk.common.hw,
> + [CLK_BUS_PWM] = &bus_pwm_clk.common.hw,
> + [CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw,
> + [CLK_MBUS_DMA] = &mbus_dma_clk.common.hw,
> + [CLK_MBUS_VE] = &mbus_ve_clk.common.hw,
> + [CLK_MBUS_CE] = &mbus_ce_clk.common.hw,
> + [CLK_MBUS_NAND] = &mbus_nand_clk.common.hw,
> + [CLK_MBUS_CSI] = &mbus_csi_clk.common.hw,
> + [CLK_MBUS_ISP] = &mbus_isp_clk.common.hw,
> + [CLK_MBUS_G2D] = &mbus_g2d_clk.common.hw,
> + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
> + [CLK_NAND0] = &nand0_clk.common.hw,
> + [CLK_NAND1] = &nand1_clk.common.hw,
> + [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
> + [CLK_MMC0] = &mmc0_clk.common.hw,
> + [CLK_MMC1] = &mmc1_clk.common.hw,
> + [CLK_MMC2] = &mmc2_clk.common.hw,
> + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
> + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
> + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
> + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
> + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
> + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
> + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
> + [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
> + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
> + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
> + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
> + [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
> + [CLK_SPI0] = &spi0_clk.common.hw,
> + [CLK_SPI1] = &spi1_clk.common.hw,
> + [CLK_SPI2] = &spi2_clk.common.hw,
> + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
> + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
> + [CLK_BUS_SPI2] = &bus_spi2_clk.common.hw,
> + [CLK_EMAC_25M] = &emac_25m_clk.common.hw,
> + [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
> + [CLK_IR_RX] = &ir_rx_clk.common.hw,
> + [CLK_BUS_IR_RX] = &bus_ir_rx_clk.common.hw,
> + [CLK_IR_TX] = &ir_tx_clk.common.hw,
> + [CLK_BUS_IR_TX] = &bus_ir_tx_clk.common.hw,
> + [CLK_BUS_GPADC] = &bus_gpadc_clk.common.hw,
> + [CLK_BUS_THS] = &bus_ths_clk.common.hw,
> + [CLK_I2S0] = &i2s0_clk.common.hw,
> + [CLK_I2S1] = &i2s1_clk.common.hw,
> + [CLK_I2S2] = &i2s2_clk.common.hw,
> + [CLK_I2S3] = &i2s3_clk.common.hw,
> + [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
> + [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
> + [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
> + [CLK_BUS_I2S3] = &bus_i2s3_clk.common.hw,
> + [CLK_SPDIF] = &spdif_clk.common.hw,
> + [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
> + [CLK_DMIC] = &dmic_clk.common.hw,
> + [CLK_BUS_DMIC] = &bus_dmic_clk.common.hw,
> + [CLK_AUDIO_DAC] = &audio_codec_dac_clk.common.hw,
> + [CLK_AUDIO_ADC] = &audio_codec_adc_clk.common.hw,
> + [CLK_AUDIO_4X] = &audio_codec_4x_clk.common.hw,
> + [CLK_BUS_AUDIO_CODEC] = &bus_audio_codec_clk.common.hw,
> + [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
> + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
> + [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
> + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
> + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
> + [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
> + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
> + [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
> + [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
> + [CLK_BUS_LRADC] = &bus_lradc_clk.common.hw,
> + [CLK_BUS_DPSS_TOP0] = &bus_dpss_top0_clk.common.hw,
> + [CLK_BUS_DPSS_TOP1] = &bus_dpss_top1_clk.common.hw,
> + [CLK_MIPI_DSI] = &mipi_dsi_clk.common.hw,
> + [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
> + [CLK_TCON_LCD] = &tcon_lcd_clk.common.hw,
> + [CLK_BUS_TCON_LCD] = &bus_tcon_lcd_clk.common.hw,
> + [CLK_LEDC] = &ledc_clk.common.hw,
> + [CLK_BUS_LEDC] = &bus_ledc_clk.common.hw,
> + [CLK_CSI_TOP] = &csi_top_clk.common.hw,
> + [CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
> + [CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
> + [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
> + [CLK_CSI_ISP] = &csi_isp_clk.common.hw,
> + },
> + .num = CLK_NUMBER,
> +};
> +
> +static struct ccu_reset_map sun50i_a100_ccu_resets[] = {
> + [RST_MBUS] = { 0x540, BIT(30) },
> +
> + [RST_BUS_DE] = { 0x60c, BIT(16) },
> + [RST_BUS_G2D] = { 0x63c, BIT(16) },
> + [RST_BUS_GPU] = { 0x67c, BIT(16) },
> + [RST_BUS_CE] = { 0x68c, BIT(16) },
> + [RST_BUS_VE] = { 0x69c, BIT(16) },
> + [RST_BUS_DMA] = { 0x70c, BIT(16) },
> + [RST_BUS_MSGBOX] = { 0x71c, BIT(16) },
> + [RST_BUS_SPINLOCK] = { 0x72c, BIT(16) },
> + [RST_BUS_HSTIMER] = { 0x73c, BIT(16) },
> + [RST_BUS_DBG] = { 0x78c, BIT(16) },
> + [RST_BUS_PSI] = { 0x79c, BIT(16) },
> + [RST_BUS_PWM] = { 0x7ac, BIT(16) },
> + [RST_BUS_DRAM] = { 0x80c, BIT(16) },
> + [RST_BUS_NAND] = { 0x82c, BIT(16) },
> + [RST_BUS_MMC0] = { 0x84c, BIT(16) },
> + [RST_BUS_MMC1] = { 0x84c, BIT(17) },
> + [RST_BUS_MMC2] = { 0x84c, BIT(18) },
> + [RST_BUS_UART0] = { 0x90c, BIT(16) },
> + [RST_BUS_UART1] = { 0x90c, BIT(17) },
> + [RST_BUS_UART2] = { 0x90c, BIT(18) },
> + [RST_BUS_UART3] = { 0x90c, BIT(19) },
> + [RST_BUS_UART4] = { 0x90c, BIT(20) },
> + [RST_BUS_I2C0] = { 0x91c, BIT(16) },
> + [RST_BUS_I2C1] = { 0x91c, BIT(17) },
> + [RST_BUS_I2C2] = { 0x91c, BIT(18) },
> + [RST_BUS_I2C3] = { 0x91c, BIT(19) },
> + [RST_BUS_SPI0] = { 0x96c, BIT(16) },
> + [RST_BUS_SPI1] = { 0x96c, BIT(17) },
> + [RST_BUS_SPI2] = { 0x96c, BIT(18) },
> + [RST_BUS_EMAC] = { 0x97c, BIT(16) },
> + [RST_BUS_IR_RX] = { 0x99c, BIT(16) },
> + [RST_BUS_IR_TX] = { 0x9cc, BIT(16) },
> + [RST_BUS_GPADC] = { 0x9ec, BIT(16) },
> + [RST_BUS_THS] = { 0x9fc, BIT(16) },
> + [RST_BUS_I2S0] = { 0xa20, BIT(16) },
> + [RST_BUS_I2S1] = { 0xa20, BIT(17) },
> + [RST_BUS_I2S2] = { 0xa20, BIT(18) },
> + [RST_BUS_I2S3] = { 0xa20, BIT(19) },
> + [RST_BUS_SPDIF] = { 0xa2c, BIT(16) },
> + [RST_BUS_DMIC] = { 0xa4c, BIT(16) },
> + [RST_BUS_AUDIO_CODEC] = { 0xa5c, BIT(16) },
> +
> + [RST_USB_PHY0] = { 0xa70, BIT(30) },
> + [RST_USB_PHY1] = { 0xa74, BIT(30) },
> +
> + [RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
> + [RST_BUS_OHCI1] = { 0xa8c, BIT(17) },
> + [RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
> + [RST_BUS_EHCI1] = { 0xa8c, BIT(21) },
> + [RST_BUS_OTG] = { 0xa8c, BIT(24) },
> +
> + [RST_BUS_LRADC] = { 0xa9c, BIT(16) },
> + [RST_BUS_DPSS_TOP0] = { 0xabc, BIT(16) },
> + [RST_BUS_DPSS_TOP1] = { 0xacc, BIT(16) },
> + [RST_BUS_MIPI_DSI] = { 0xb4c, BIT(16) },
> + [RST_BUS_TCON_LCD] = { 0xb7c, BIT(16) },
> + [RST_BUS_LVDS] = { 0xbac, BIT(16) },
> + [RST_BUS_LEDC] = { 0xbfc, BIT(16) },
> + [RST_BUS_CSI] = { 0xc1c, BIT(16) },
> + [RST_BUS_CSI_ISP] = { 0xc2c, BIT(16) },
> +};
> +
> +static const struct sunxi_ccu_desc sun50i_a100_ccu_desc = {
> + .ccu_clks = sun50i_a100_ccu_clks,
> + .num_ccu_clks = ARRAY_SIZE(sun50i_a100_ccu_clks),
> +
> + .hw_clks = &sun50i_a100_hw_clks,
> +
> + .resets = sun50i_a100_ccu_resets,
> + .num_resets = ARRAY_SIZE(sun50i_a100_ccu_resets),
> +};
> +
> +static const u32 sun50i_a100_pll_regs[] = {
> + SUN50I_A100_PLL_CPUX_REG,
> + SUN50I_A100_PLL_DDR0_REG,
> + SUN50I_A100_PLL_PERIPH0_REG,
> + SUN50I_A100_PLL_PERIPH1_REG,
> + SUN50I_A100_PLL_GPU_REG,
> + SUN50I_A100_PLL_VIDEO0_REG,
> + SUN50I_A100_PLL_VIDEO1_REG,
> + SUN50I_A100_PLL_VIDEO2_REG,
> + SUN50I_A100_PLL_VIDEO3_REG,
> + SUN50I_A100_PLL_VE_REG,
> + SUN50I_A100_PLL_COM_REG,
> + SUN50I_A100_PLL_AUDIO_REG,
> +};
> +
> +static const u32 sun50i_a100_pll_video_regs[] = {
> + SUN50I_A100_PLL_VIDEO0_REG,
> + SUN50I_A100_PLL_VIDEO1_REG,
> + SUN50I_A100_PLL_VIDEO2_REG,
> + SUN50I_A100_PLL_VIDEO3_REG,
> +};
> +
> +static const u32 sun50i_a100_usb2_clk_regs[] = {
> + SUN50I_A100_USB0_CLK_REG,
> + SUN50I_A100_USB1_CLK_REG,
> +};
> +
> +static struct ccu_pll_nb sun50i_a100_pll_cpu_nb = {
> + .common = &pll_cpux_clk.common,
> + /* copy from pll_cpux_clk */
> + .enable = BIT(27),
> + .lock = BIT(28),
> +};
> +
> +static struct ccu_mux_nb sun50i_a100_cpu_nb = {
> + .common = &cpux_clk.common,
> + .cm = &cpux_clk.mux,
> + .delay_us = 1,
> + .bypass_index = 4, /* index of pll periph0 */
> +};
> +
> +static int sun50i_a100_ccu_probe(struct platform_device *pdev)
> +{
> + void __iomem *reg;
> + u32 val;
> + int i, ret;
> +
> + reg = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(reg))
> + return PTR_ERR(reg);
> +
> + /* Enable the lock bits on all PLLs */
> + for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_regs); i++) {
> + val = readl(reg + sun50i_a100_pll_regs[i]);
> + val |= BIT(29);
> + writel(val, reg + sun50i_a100_pll_regs[i]);
> + }

Having a define for the BIT(29) and the enable and lock bits earlier
would be nice.

> +
> + /*
> + * In order to pass the EMI certification, the SDM function of
> + * the peripheral 1 bus is enabled, and the frequency is still
> + * calculated using the previous division factor.
> + */
> + writel(0xd1303333, reg + SUN50I_A100_PLL_PERIPH1_PATTERN0_REG);

Ditto

> + val = readl(reg + SUN50I_A100_PLL_PERIPH1_REG);
> + val |= BIT(24);
> + writel(val, reg + SUN50I_A100_PLL_PERIPH1_REG);

Ditto

> + /*
> + * Force the output divider of video PLLs to 0.
> + *
> + * See the comment before pll-video0 definition for the reason.
> + */
> + for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_video_regs); i++) {
> + val = readl(reg + sun50i_a100_pll_video_regs[i]);
> + val &= ~BIT(0);
> + writel(val, reg + sun50i_a100_pll_video_regs[i]);

You get the idea :)

> diff --git a/include/dt-bindings/clock/sun50i-a100-ccu.h b/include/dt-bindings/clock/sun50i-a100-ccu.h
> new file mode 100644
> index 0000000..8cdf563
> --- /dev/null
> +++ b/include/dt-bindings/clock/sun50i-a100-ccu.h
> @@ -0,0 +1,116 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
> +/*
> + * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_SUN50I_A100_H_
> +#define _DT_BINDINGS_CLK_SUN50I_A100_H_
> +
> +#define CLK_PLL_PERIPH0 3
> +
> +#define CLK_CPUX 24
> +
> +#define CLK_APB1 29
> +
> +#define CLK_MBUS 31
> +#define CLK_DE 32
> +#define CLK_BUS_DE 33
> +#define CLK_G2D 34
> +#define CLK_BUS_G2D 35
> +#define CLK_GPU 36
> +#define CLK_BUS_GPU 37
> +#define CLK_CE 38
> +#define CLK_BUS_CE 39
> +#define CLK_VE 40
> +#define CLK_BUS_VE 41
> +#define CLK_BUS_DMA 42
> +#define CLK_BUS_MSGBOX 43
> +#define CLK_BUS_SPINLOCK 44
> +#define CLK_BUS_HSTIMER 45
> +#define CLK_AVS 46
> +#define CLK_BUS_DBG 47
> +#define CLK_BUS_PSI 48
> +#define CLK_BUS_PWM 49
> +#define CLK_BUS_IOMMU 50
> +#define CLK_MBUS_DMA 51
> +#define CLK_MBUS_VE 52
> +#define CLK_MBUS_CE 53
> +#define CLK_MBUS_NAND 54
> +#define CLK_MBUS_CSI 55
> +#define CLK_MBUS_ISP 56
> +#define CLK_MBUS_G2D 57
> +
> +#define CLK_NAND0 59
> +#define CLK_NAND1 60
> +#define CLK_BUS_NAND 61
> +#define CLK_MMC0 62
> +#define CLK_MMC1 63
> +#define CLK_MMC2 64
> +#define CLK_MMC3 65
> +#define CLK_BUS_MMC0 66
> +#define CLK_BUS_MMC1 67
> +#define CLK_BUS_MMC2 68
> +#define CLK_BUS_UART0 69
> +#define CLK_BUS_UART1 70
> +#define CLK_BUS_UART2 71
> +#define CLK_BUS_UART3 72
> +#define CLK_BUS_UART4 73
> +#define CLK_BUS_I2C0 74
> +#define CLK_BUS_I2C1 75
> +#define CLK_BUS_I2C2 76
> +#define CLK_BUS_I2C3 77
> +#define CLK_SPI0 78
> +#define CLK_SPI1 79
> +#define CLK_SPI2 80
> +#define CLK_BUS_SPI0 81
> +#define CLK_BUS_SPI1 82
> +#define CLK_BUS_SPI2 83
> +#define CLK_EMAC_25M 84
> +#define CLK_BUS_EMAC 85
> +#define CLK_IR_RX 86
> +#define CLK_BUS_IR_RX 87
> +#define CLK_IR_TX 88
> +#define CLK_BUS_IR_TX 89
> +#define CLK_BUS_GPADC 90
> +#define CLK_BUS_THS 91
> +#define CLK_I2S0 92
> +#define CLK_I2S1 93
> +#define CLK_I2S2 94
> +#define CLK_I2S3 95
> +#define CLK_BUS_I2S0 96
> +#define CLK_BUS_I2S1 97
> +#define CLK_BUS_I2S2 98
> +#define CLK_BUS_I2S3 99
> +#define CLK_SPDIF 100
> +#define CLK_BUS_SPDIF 101
> +#define CLK_DMIC 102
> +#define CLK_BUS_DMIC 103
> +#define CLK_AUDIO_DAC 104
> +#define CLK_AUDIO_ADC 105
> +#define CLK_AUDIO_4X 106
> +#define CLK_BUS_AUDIO_CODEC 107
> +#define CLK_USB_OHCI0 108
> +#define CLK_USB_PHY0 109
> +#define CLK_USB_OHCI1 110
> +#define CLK_USB_PHY1 111
> +#define CLK_BUS_OHCI0 112
> +#define CLK_BUS_OHCI1 113
> +#define CLK_BUS_EHCI0 114
> +#define CLK_BUS_EHCI1 115
> +#define CLK_BUS_OTG 116
> +#define CLK_BUS_LRADC 117
> +#define CLK_BUS_DPSS_TOP0 118
> +#define CLK_BUS_DPSS_TOP1 119
> +#define CLK_MIPI_DSI 120
> +#define CLK_BUS_MIPI_DSI 121
> +#define CLK_TCON_LCD 122
> +#define CLK_BUS_TCON_LCD 123
> +#define CLK_LEDC 124
> +#define CLK_BUS_LEDC 125
> +#define CLK_CSI_TOP 126
> +#define CLK_CSI0_MCLK 127
> +#define CLK_CSI1_MCLK 128
> +#define CLK_BUS_CSI 129
> +#define CLK_CSI_ISP 130
> +
> +#endif /* _DT_BINDINGS_CLK_SUN50I_A100_H_ */

This is hard to tell without the datasheet, but I'd rather have them
ordered by registers that functions. It's easier to debug later on, but
usually the core clocks are in lower address registers than the "leaves"
clocks, which allows to avoid most of the registration order issues.

Thanks!
Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-06-29 20:53    [W:0.743 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site