lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/2] ARM: imx6plus: enable internal routing of clk_enet_ref where possible
Hi Sven,

On Mon, Jun 29, 2020 at 10:40 AM Sven Van Asbroeck <thesven73@gmail.com> wrote:

> Thank you for testing this out on a different platform !
>
> I had a look at how things are done in the Freescale fork of the kernel
> (5.4.24_2.1.0) and I noticed that this kernel has almost the same
> behaviour as this proposed patch: the GPR5 bit is _always_ set
> on a plus. The code does not check how the enet clock is generated.
>
> https://source.codeaurora.org/external/imx/linux-imx/tree/arch/arm/mach-imx/mach-imx6q.c?h=rel_imx_5.4.24_2.1.0&id=babac008e5cf168abca1a85bda2e8071ca27a5c0#n269
>
> Now, I'm assuming that the sabresd-plus can run on the Freescale
> kernel fork. The GPR5 bit will always be set there.

Just tested 5.4.24_2.1.0 on an imx6qp sabresd and DHCP also fails there.

\
 
 \ /
  Last update: 2020-06-29 23:01    [W:0.105 / U:0.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site