lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 064/131] regualtor: pfuze100: correct sw1a/sw2 on pfuze3000
Date
From: Robin Gong <yibin.gong@nxp.com>

[ Upstream commit 6f1cf5257acc6e6242ddf2f52bc7912aed77b79f ]

PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg
is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on
pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG
and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG
and pfuze100_sw_regulator_ops.

Fixes: 1dced996ee70 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a")
Reported-by: Christophe Meynard <Christophe.Meynard@ign.fr>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/pfuze100-regulator.c | 60 +++++++++++++++++---------
1 file changed, 39 insertions(+), 21 deletions(-)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 69a377ab26041..30e92a9cc97e9 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -196,6 +196,19 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {

};

+static const struct regulator_ops pfuze3000_sw_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = pfuze100_set_ramp_delay,
+
+};
+
#define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \
[_chip ## _ ## _name] = { \
.desc = { \
@@ -305,23 +318,28 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
.stby_mask = 0x20, \
}

-
-#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \
- .desc = { \
- .name = #_name,\
- .n_voltages = ((max) - (min)) / (step) + 1, \
- .ops = &pfuze100_sw_regulator_ops, \
- .type = REGULATOR_VOLTAGE, \
- .id = _chip ## _ ## _name, \
- .owner = THIS_MODULE, \
- .min_uV = (min), \
- .uV_step = (step), \
- .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
- .vsel_mask = 0x7, \
- }, \
- .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
- .stby_mask = 0x7, \
-}
+/* No linar case for the some switches of PFUZE3000 */
+#define PFUZE3000_SW_REG(_chip, _name, base, mask, voltages) \
+ [_chip ## _ ## _name] = { \
+ .desc = { \
+ .name = #_name, \
+ .n_voltages = ARRAY_SIZE(voltages), \
+ .ops = &pfuze3000_sw_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _chip ## _ ## _name, \
+ .owner = THIS_MODULE, \
+ .volt_table = voltages, \
+ .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
+ .vsel_mask = (mask), \
+ .enable_reg = (base) + PFUZE100_MODE_OFFSET, \
+ .enable_mask = 0xf, \
+ .enable_val = 0x8, \
+ .enable_time = 500, \
+ }, \
+ .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
+ .stby_mask = (mask), \
+ .sw_reg = true, \
+ }

#define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \
.desc = { \
@@ -377,9 +395,9 @@ static struct pfuze_regulator pfuze200_regulators[] = {
};

static struct pfuze_regulator pfuze3000_regulators[] = {
- PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
+ PFUZE3000_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000),
- PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
+ PFUZE3000_SW_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst),
PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
@@ -393,8 +411,8 @@ static struct pfuze_regulator pfuze3000_regulators[] = {
};

static struct pfuze_regulator pfuze3001_regulators[] = {
- PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
- PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
+ PFUZE3000_SW_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
+ PFUZE3000_SW_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),
--
2.25.1
\
 
 \ /
  Last update: 2020-06-29 22:09    [W:1.059 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site