lkml.org 
[lkml]   [2020]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND][PATCH v3] x86/apic/flat64: Add back the early_param("apic", parse_apic)
Date
parse_apic() allows the user to try a different APIC driver than the
default one that's automatically chosen. It works for X86-32, but
doesn't work for X86-64 because it was removed in 2009 for X86-64 by
commit 7b38725318f4 ("x86: remove subarchitecture support code"),
whose changelog doesn't explicitly describe the removal for X86-64.

The patch adds back the functionality for X86-64. The intent is mainly
to work around an APIC emulation bug in Hyper-V in the case of kdump:
currently Hyper-V does not honor the disabled state of the local APICs,
so all the IOAPIC-based interrupts may not be delivered to the correct
virtual CPU, if the logical-mode APIC driver is used (the kdump
kernel usually uses the logical-mode APIC driver, since typically
only 1 CPU is active). Luckily the kdump issue can be worked around by
forcing the kdump kernel to use physical mode, before the fix to Hyper-V
becomes widely available.

The current algorithm of choosing an APIC driver is:

1. The global pointer "struct apic *apic" has a default value, i.e
"apic_default" on X86-32, and "apic_flat" on X86-64.

2. If the early_param "apic=" is specified, parse_apic() is called and
the pointer "apic" is changed if a matching APIC driver is found.

3. default_acpi_madt_oem_check() calls the acpi_madt_oem_check() method
of all APIC drivers, which may override the "apic" pointer.

4. default_setup_apic_routing() may override the "apic" pointer, e.g.
by calling the probe() method of all APIC drivers. Note: refer to the
order of the APIC drivers specified in arch/x86/kernel/apic/Makefile.

The patch is safe because if the apic= early param is not specified,
the current algorithm of choosing an APIC driver is unchanged; when the
param is specified (e.g. on X86-64, "apic=physical flat"), the kernel
still tries to find a "more suitable" APIC driver in the above step 3 and
4: e.g. if the BIOS/firmware requires that apic_x2apic_phys should be used,
the above step 4 will override the APIC driver to apic_x2apic_phys, even
if an early_param "apic=physical flat" is specified.

On Hyper-V, when a Linux VM has <= 8 virtual CPUs, if we use
"apic=physical flat", sending IPIs to multiple vCPUs is still fast because
Linux VM uses the para-virtualized IPI hypercalls: see hv_apic_init().

The patch adds the __init tag for flat_acpi_madt_oem_check() and
physflat_acpi_madt_oem_check() to avoid a warning seen with "make W=1":
flat_acpi_madt_oem_check() accesses cmdline_apic, which has a __initdata
tag.

Fixes: 7b38725318f4 ("x86: remove subarchitecture support code")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
---

Changes in v2 (5/28/2020):
Updated Documentation/admin-guide/kernel-parameters.txt. [Randy Dunlap]
Changed apic_set_verbosity().
Enhanced the changelog.

Changes in v3 (5/31/2020):
Added the __init tag for flat_acpi_madt_oem_check() and
physflat_acpi_madt_oem_check() to avoid a warning seen with "make W=1".
(Thanks to kbuild test robot <lkp@intel.com>).

Updated the changelog for the __init tag.

Today is 6/26/2020 and this is just a RESEND of v3, which was posted
on 5/31 (https://lkml.org/lkml/2020/5/31/198).

.../admin-guide/kernel-parameters.txt | 11 +++++--
arch/x86/kernel/apic/apic.c | 11 +++----
arch/x86/kernel/apic/apic_flat_64.c | 31 +++++++++++++++++--
3 files changed, 40 insertions(+), 13 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 7bc83f3d9bdf..c4503fff9348 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -341,10 +341,15 @@
Format: { quiet (default) | verbose | debug }
Change the amount of debugging information output
when initialising the APIC and IO-APIC components.
- For X86-32, this can also be used to specify an APIC
- driver name.
+ This can also be used to specify an APIC driver name.
Format: apic=driver_name
- Examples: apic=bigsmp
+ Examples:
+ On X86-32: apic=bigsmp
+ On X86-64: "apic=physical flat"
+ Note: the available driver names depend on the
+ architecture and the kernel config; the setting may
+ be overridden by the acpi_madt_oem_check() and probe()
+ methods of other APIC drivers.

apic_extnmi= [APIC,X86] External NMI delivery setting
Format: { bsp (default) | all | none }
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index e53dda210cd7..6f7d75b6358b 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2855,13 +2855,10 @@ static int __init apic_set_verbosity(char *arg)
apic_verbosity = APIC_DEBUG;
else if (strcmp("verbose", arg) == 0)
apic_verbosity = APIC_VERBOSE;
-#ifdef CONFIG_X86_64
- else {
- pr_warn("APIC Verbosity level %s not recognised"
- " use apic=verbose or apic=debug\n", arg);
- return -EINVAL;
- }
-#endif
+
+ /* Ignore unrecognized verbosity level setting. */
+
+ pr_info("APIC Verbosity level is %d\n", apic_verbosity);

return 0;
}
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 7862b152a052..da8f3640453f 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -23,9 +23,34 @@ static struct apic apic_flat;
struct apic *apic __ro_after_init = &apic_flat;
EXPORT_SYMBOL_GPL(apic);

-static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int cmdline_apic __initdata;
+static int __init parse_apic(char *arg)
{
- return 1;
+ struct apic **drv;
+
+ if (!arg)
+ return -EINVAL;
+
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if (!strcmp((*drv)->name, arg)) {
+ apic = *drv;
+ cmdline_apic = 1;
+ return 0;
+ }
+ }
+
+ /* Parsed again by __setup for debug/verbose */
+ return 0;
+}
+early_param("apic", parse_apic);
+
+
+static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (!cmdline_apic)
+ return 1;
+
+ return apic == &apic_flat;
}

/*
@@ -157,7 +182,7 @@ static struct apic apic_flat __ro_after_init = {
* We cannot use logical delivery in this case because the mask
* overflows, so use physical mode.
*/
-static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
#ifdef CONFIG_ACPI
/*
--
2.19.1
\
 
 \ /
  Last update: 2020-06-26 20:22    [W:0.077 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site