lkml.org 
[lkml]   [2020]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] dt-bindings: tas2562: Add voltage sense slot property
Date
Add a property to configure the slot for the voltage sense monitoring of
the device. Vsense data will be sent to the processor via the slot
defined by the property

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
Documentation/devicetree/bindings/sound/tas2562.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt
index fd0ac8636c01..dc6d7362ded7 100644
--- a/Documentation/devicetree/bindings/sound/tas2562.txt
+++ b/Documentation/devicetree/bindings/sound/tas2562.txt
@@ -11,6 +11,8 @@ Required properties:
- compatible: - Should contain "ti,tas2562", "ti,tas2563".
- reg: - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
- ti,imon-slot-no:- TDM TX current sense time slot.
+ - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be
+ greater then ti,imon-slot-no.

Optional properties:
- interrupt-parent: phandle to the interrupt controller which provides
@@ -30,5 +32,6 @@ tas2562@4c {

shut-down-gpio = <&gpio1 15 0>;
ti,imon-slot-no = <0>;
+ ti,vmon-slot-no = <1>;
};

--
2.26.2
\
 
 \ /
  Last update: 2020-06-26 17:43    [W:0.068 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site