lkml.org 
[lkml]   [2020]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] tty: serial: fsl_lpuart: minimum baud rate support
Date
From: Vabhav Sharma <vabhav.sharma@nxp.com>

The formula for the baud rate is
baud rate = "baud clock / ((OSR+1) × SBR)

Algorithm used in function lpuart32_serial_setbrg() only changes
the SBR. Even with maxmum value put in, OSR stays at 0x7 and the
lowest baud rate would be ~ 2600 bps

Update the algorithm to allow driver operation at 1200,2400 or 600 bps

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
---
V2:
- Incorporated review comment from Greg
---
drivers/tty/serial/fsl_lpuart.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 90298c4..7ca6422 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1925,6 +1925,9 @@ static void __lpuart32_serial_setbrg(struct uart_port *port,
tmp_sbr++;
}

+ if (tmp_sbr > UARTBAUD_SBR_MASK)
+ continue;
+
if (tmp_diff <= baud_diff) {
baud_diff = tmp_diff;
osr = tmp_osr;
--
2.7.4
\
 
 \ /
  Last update: 2020-06-26 13:27    [W:0.038 / U:2.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site