lkml.org 
[lkml]   [2020]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V8 0/8] Add interconnect support to QSPI and QUP drivers
On Tue 23 Jun 03:38 PDT 2020, Akash Asthana wrote:

> This patch series is based on tag "next-20200622" of linux-next tree.
>

Series applied to the qcom tree, thank you and thanks for the Acks.

Regards,
Bjorn

> High level design:
> - QUP wrapper/common driver.
> Vote for QUP core on behalf of earlycon from probe.
> Remove BW vote during earlycon exit call
>
> - SERIAL driver.
> Vote only for CPU/CORE path because driver is in FIFO mode only
> Vote/unvote from qcom_geni_serial_pm func.
> Bump up the CPU vote from set_termios call based on real time need
>
> - I2C driver.
> Vote for CORE/CPU/DDR path
> Vote/unvote from runtime resume/suspend callback
> As bus speed for I2C is fixed from probe itself no need for bump up.
>
> - SPI QUP driver.
> Vote only for CPU/CORE path because driver is in FIFO mode only
> Vote/unvote from runtime resume/suspend callback
> Bump up CPU vote based on real time need per transfer.
>
> - QSPI driver.
> Vote only for CPU path
> Vote/unvote from runtime resume/suspend callback
> Bump up CPU vote based on real time need per transfer.
>
> Changes in V2:
> - Add devm_of_icc_get() API interconnect core.
> - Add ICC support to common driver to fix earlyconsole crash.
>
> Changes in V3:
> - Define common ICC APIs in geni-se driver and use it across geni based
> I2C,SPI and UART driver.
>
> Changes in V4:
> - Add a patch to ICC core to scale peak requirement
> as twice of average if it is not mentioned explicilty.
>
> Changes in V5:
> - As per Georgi's suggestion removed patch from ICC core for assuming
> peak_bw as twice of average when it's not mentioned, instead assume it
> equall to avg_bw and keep this assumption in ICC client itself.
> - As per Matthias suggestion use enum for GENI QUP ICC paths.
>
> Changes in V6:
> - No Major change
>
> Changes in V7:
> - As per Matthias's comment removed usage of peak_bw variable because we don't
> have explicit peak requirement, we were voting peak = avg and this can be
> tracked using single variable for avg bw.
> - As per Matthias's comment improved print log.
>
> Changes in V8:
> - Add [PATCH V8 5/8] to factor out common code for clock setting.
> - Combine ICC voting and clock setting to single API. [PATCH V8 6/8]
> - Add ICC voting per transfer because in case of multi message,
> transfer frequency can vary for each message/transfer.[PATCH V8 6/8]
>
> Akash Asthana (7):
> soc: qcom: geni: Support for ICC voting
> soc: qcom-geni-se: Add interconnect support to fix earlycon crash
> i2c: i2c-qcom-geni: Add interconnect support
> tty: serial: qcom_geni_serial: Add interconnect support
> spi: spi-geni-qcom: Add interconnect support
> spi: spi-qcom-qspi: Add interconnect support
> arm64: dts: sc7180: Add interconnect for QUP and QSPI
>
> Douglas Anderson (1):
> spi: spi-geni-qcom: Combine the clock setting code
>
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 127 ++++++++++++++++++++++++++++
> drivers/i2c/busses/i2c-qcom-geni.c | 26 +++++-
> drivers/soc/qcom/qcom-geni-se.c | 150 ++++++++++++++++++++++++++++++++++
> drivers/spi/spi-geni-qcom.c | 100 +++++++++++++++--------
> drivers/spi/spi-qcom-qspi.c | 56 ++++++++++++-
> drivers/tty/serial/qcom_geni_serial.c | 38 ++++++++-
> include/linux/qcom-geni-se.h | 40 +++++++++
> 7 files changed, 496 insertions(+), 41 deletions(-)
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
>

\
 
 \ /
  Last update: 2020-06-25 07:01    [W:0.172 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site