lkml.org 
[lkml]   [2020]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 0/2] MTE support for KVM guest
On Wed, Jun 24, 2020 at 03:59:35PM +0100, Steven Price wrote:
> On 24/06/2020 15:21, Catalin Marinas wrote:
> > On Wed, Jun 24, 2020 at 12:16:28PM +0100, Steven Price wrote:
> > > On 23/06/2020 18:48, Catalin Marinas wrote:
> > > > On Wed, Jun 17, 2020 at 01:38:42PM +0100, Steven Price wrote:
> > > > > These patches add support to KVM to enable MTE within a guest. It is
> > > > > based on Catalin's v4 MTE user space series[1].
> > > > >
> > > > > [1] http://lkml.kernel.org/r/20200515171612.1020-1-catalin.marinas%40arm.com
> > > > >
> > > > > Posting as an RFC as I'd like feedback on the approach taken. First a
> > > > > little background on how MTE fits within the architecture:
> > > > >
> > > > > The stage 2 page tables have limited scope for controlling the
> > > > > availability of MTE. If a page is mapped as Normal and cached in stage 2
> > > > > then it's the stage 1 tables that get to choose whether the memory is
> > > > > tagged or not. So the only way of forbidding tags on a page from the
> > > > > hypervisor is to change the cacheability (or make it device memory)
> > > > > which would cause other problems. Note this restriction fits the
> > > > > intention that a system should have all (general purpose) memory
> > > > > supporting tags if it support MTE, so it's not too surprising.
> > > > >
> > > > > However, the upshot of this is that to enable MTE within a guest all
> > > > > pages of memory mapped into the guest as normal cached pages in stage 2
> > > > > *must* support MTE (i.e. we must ensure the tags are appropriately
> > > > > sanitised and save/restore the tags during swap etc).
> > > > >
> > > > > My current approach is that KVM transparently upgrades any pages
> > > > > provided by the VMM to be tag-enabled when they are faulted in (i.e.
> > > > > sets the PG_mte_tagged flag on the page) which has the benefit of
> > > > > requiring fewer changes in the VMM. However, save/restore of the VM
> > > > > state still requires the VMM to have a PROT_MTE enabled mapping so that
> > > > > it can access the tag values. A VMM which 'forgets' to enable PROT_MTE
> > > > > would lose the tag values when saving/restoring (tags are RAZ/WI when
> > > > > PROT_MTE isn't set).
> > > > >
> > > > > An alternative approach would be to enforce the VMM provides PROT_MTE
> > > > > memory in the first place. This seems appealing to prevent the above
> > > > > potentially unexpected gotchas with save/restore, however this would
> > > > > also extend to memory that you might not expect to have PROT_MTE (e.g. a
> > > > > shared frame buffer for an emulated graphics card).
> > > >
> > > > As you mentioned above, if memory is mapped as Normal Cacheable at Stage
> > > > 2 (whether we use FWB or not), the guest is allowed to turn MTE on via
> > > > Stage 1. There is no way for KVM to prevent a guest from using MTE other
> > > > than the big HCR_EL2.ATA knob.
> > > >
> > > > This causes potential issues since we can't guarantee that all the
> > > > Cacheable memory slots allocated by the VMM support MTE. If they do not,
> > > > the arch behaviour is "unpredictable". We also can't trust the guest to
> > > > not enable MTE on such Cacheable mappings.
> > >
> > > Architecturally it seems dodgy to export any address that isn't "normal
> > > memory" (i.e. with tag storage) to the guest as Normal Cacheable. Although
> > > I'm a bit worried this might cause a regression in some existing case.
> >
> > What I had in mind is some persistent memory that may be given to the
> > guest for direct access. This is allowed to be cacheable (write-back)
> > but may not have tag storage.
>
> At the moment we don't have a good idea what would happen if/when the guest
> (or host) attempts to use that memory as tagged. If we have a relatively
> safe hardware behaviour (e.g. the tags are silently dropped/read-as-zero)
> then that's not a big issue. But if the accesses cause some form of abort
> then we need to understand how that would be handled.

The architecture is not prescriptive here, the behaviour is
"unpredictable". It could mean tags read-as-zero/write-ignored or an
SError.

> > > > 1. As in your current patches, assume any Cacheable at Stage 2 can have
> > > > MTE enabled at Stage 1. In addition, we need to check whether the
> > > > physical memory supports MTE and it could be something simple like
> > > > pfn_valid(). Is there a way to reject a memory slot passed by the
> > > > VMM?
> > >
> > > Yes pfn_valid() should have been in there. At the moment pfn_to_page() is
> > > called without any checks.
> > >
> > > The problem with attempting to reject a memory slot is that the memory
> > > backing that slot can change. So checking at the time the slot is created
> > > isn't enough (although it might be a useful error checking feature).
> >
> > But isn't the slot changed as a result of another VMM call? So we could
> > always have such check in place.
>
> Once you have created a memslot the guest's view of memory follows the user
> space's address space. This is the KVM_CAP_SYNC_MMU capability. So there's
> nothing stopping a VMM adding a memslot backed with perfectly reasonable
> memory then mmap()ing over the top of it some memory which isn't MTE
> compatible. KVM gets told the memory is being removed (via mmu notifiers)
> but I think it waits for the next fault before (re)creating the stage 2
> entries.

OK, so that's where we could kill the guest if the VMM doesn't play
nicely. It means that we need the check when setting up the stage 2
entry. I guess it's fine if we only have the check at that point and
ignore it on KVM_SET_USER_MEMORY_REGION. It would be nice if we returned
on error on slot setup but we may not know (yet) whether the VMM intends
to enable MTE for the guest.

> > > It's not clear to me what we can do at fault time when we discover the
> > > memory isn't tag-capable and would have been mapped cacheable other than
> > > kill the VM.
> >
> > Indeed, I don't have a better idea other than trying not to get in this
> > situation.
>
> Sadly to me it looks like it's not really possible to avoid a (malicious)
> VMM getting us there. But we can certainly try to avoid a VMM accidentally
> ending up in the situation.

What we need to avoid is a malicious VMM affecting the host kernel. If
the VMM wants to corrupt the guest, I think it has other ways already
even without MTE.

--
Catalin

\
 
 \ /
  Last update: 2020-06-24 18:26    [W:0.085 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site