lkml.org 
[lkml]   [2020]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC] MFD's relationship with Device Tree (OF)
From
Date
+Frank (me)

On 2020-06-22 16:03, Michael Walle wrote:
> Am 2020-06-14 12:26, schrieb Michael Walle:
>> Hi Rob,
>>
>> Am 2020-06-10 00:03, schrieb Rob Herring:
>> [..]
>>> Yes, we should use 'reg' whenever possible. If we don't have 'reg',
>>> then you shouldn't have a unit-address either and you can simply match
>>> on the node name (standard DT driver matching is with compatible,
>>> device_type, and node name (w/o unit-address)). We've generally been
>>> doing 'classname-N' when there's no 'reg' to do 'classname@N'.
>>> Matching on 'classname-N' would work with node name matching as only
>>> unit-addresses are stripped.
>>
>> This still keeps me thinking. Shouldn't we allow the (MFD!) device
>> driver creator to choose between "classname@N" and "classname-N".
>> In most cases N might not be made up, but it is arbitrarily chosen;
>> for example you've chosen the bank for the ab8500 reg. It is not
>> a defined entity, like an I2C address if your parent is an I2C bus,
>> or a SPI chip select, or the memory address in case of MMIO. Instead
>> the device driver creator just chooses some "random" property from
>> the datasheet; another device creator might have chosen another
>> property. Wouldn't it make more sense, to just say this MFD provides
>> N pwm devices and the subnodes are matching based on pwm-{0,1..N-1}?
>> That would also be the logical consequence of the current MFD sub
>> device to OF node matching code, which just supports N=1.
>>
>
> Rob? Lee?
>
> -michael

\
 
 \ /
  Last update: 2020-06-24 23:02    [W:0.069 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site