lkml.org 
[lkml]   [2020]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dt-bindings: bus: uniphier-system-bus: fix warning in example
Date
Since commit e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to
json-schema"), the schema for "ns16550a" is checked.

'make dt_binding_check' emits the following warning:

uart@5,00200000: $nodename:0: 'uart@5,00200000' does not match '^serial(@[0-9a-f,]+)*$'

Rename the node to follow the pattern defined in
Documentation/devicetree/bindings/serial/serial.yaml

While I was here, I removed leading zeros from unit names.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

Changes in v2:
- change unit names too

.../bindings/bus/socionext,uniphier-system-bus.yaml | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
index c4c9119e4a20..a0c6c5d2b70f 100644
--- a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
+++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
@@ -80,14 +80,14 @@ examples:
ranges = <1 0x00000000 0x42000000 0x02000000>,
<5 0x00000000 0x46000000 0x01000000>;

- ethernet@1,01f00000 {
+ ethernet@1,1f00000 {
compatible = "smsc,lan9115";
reg = <1 0x01f00000 0x1000>;
interrupts = <0 48 4>;
phy-mode = "mii";
};

- uart@5,00200000 {
+ serial@5,200000 {
compatible = "ns16550a";
reg = <5 0x00200000 0x20>;
interrupts = <0 49 4>;
--
2.25.1
\
 
 \ /
  Last update: 2020-06-23 13:35    [W:0.027 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site