lkml.org 
[lkml]   [2020]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V8 5/8] spi: spi-geni-qcom: Combine the clock setting code
Date
From: Douglas Anderson <dianders@chromium.org>

There is code for adjusting the clock both in setup_fifo_params()
(called from prepare_message()) and in setup_fifo_xfer() (called from
transfer_one()). The code is the same. Abstract it out to a shared
function.

This is a no-op cleanup patch. The only change is to the error string
if we fail to set the clock. Since the two paths has marginally
different error messages I picked the clean one.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
---
This patch is introduced in V8 of the series.

drivers/spi/spi-geni-qcom.c | 70 ++++++++++++++++++++++-----------------------
1 file changed, 35 insertions(+), 35 deletions(-)

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index 0c534d1..f186906 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -192,14 +192,42 @@ static void spi_setup_word_len(struct spi_geni_master *mas, u16 mode,
writel(word_len, se->base + SE_SPI_WORD_LEN);
}

+static int geni_spi_set_clock(struct spi_geni_master *mas, unsigned long clk_hz)
+{
+ u32 clk_sel, m_clk_cfg, idx, div;
+ struct geni_se *se = &mas->se;
+ int ret;
+
+ ret = get_spi_clk_cfg(clk_hz, mas, &idx, &div);
+ if (ret) {
+ dev_err(mas->dev, "Err setting clk to %lu: %d\n", clk_hz, ret);
+ return ret;
+ }
+
+ /*
+ * SPI core clock gets configured with the requested frequency
+ * or the frequency closer to the requested frequency.
+ * For that reason requested frequency is stored in the
+ * cur_speed_hz and referred in the consecutive transfer instead
+ * of calling clk_get_rate() API.
+ */
+ mas->cur_speed_hz = clk_hz;
+
+ clk_sel = idx & CLK_SEL_MSK;
+ m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
+ writel(clk_sel, se->base + SE_GENI_CLK_SEL);
+ writel(m_clk_cfg, se->base + GENI_SER_M_CLK_CFG);
+
+ return 0;
+}
+
static int setup_fifo_params(struct spi_device *spi_slv,
struct spi_master *spi)
{
struct spi_geni_master *mas = spi_master_get_devdata(spi);
struct geni_se *se = &mas->se;
u32 loopback_cfg, cpol, cpha, demux_output_inv;
- u32 demux_sel, clk_sel, m_clk_cfg, idx, div;
- int ret;
+ u32 demux_sel;

loopback_cfg = readl(se->base + SE_SPI_LOOPBACK);
cpol = readl(se->base + SE_SPI_CPOL);
@@ -222,27 +250,16 @@ static int setup_fifo_params(struct spi_device *spi_slv,
demux_output_inv = BIT(spi_slv->chip_select);

demux_sel = spi_slv->chip_select;
- mas->cur_speed_hz = spi_slv->max_speed_hz;
mas->cur_bits_per_word = spi_slv->bits_per_word;

- ret = get_spi_clk_cfg(mas->cur_speed_hz, mas, &idx, &div);
- if (ret) {
- dev_err(mas->dev, "Err setting clks ret(%d) for %ld\n",
- ret, mas->cur_speed_hz);
- return ret;
- }
-
- clk_sel = idx & CLK_SEL_MSK;
- m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
spi_setup_word_len(mas, spi_slv->mode, spi_slv->bits_per_word);
writel(loopback_cfg, se->base + SE_SPI_LOOPBACK);
writel(demux_sel, se->base + SE_SPI_DEMUX_SEL);
writel(cpha, se->base + SE_SPI_CPHA);
writel(cpol, se->base + SE_SPI_CPOL);
writel(demux_output_inv, se->base + SE_SPI_DEMUX_OUTPUT_INV);
- writel(clk_sel, se->base + SE_GENI_CLK_SEL);
- writel(m_clk_cfg, se->base + GENI_SER_M_CLK_CFG);
- return 0;
+
+ return geni_spi_set_clock(mas, spi_slv->max_speed_hz);
}

static int spi_geni_prepare_message(struct spi_master *spi,
@@ -304,6 +321,7 @@ static void setup_fifo_xfer(struct spi_transfer *xfer,
u32 m_cmd = 0;
u32 spi_tx_cfg, len;
struct geni_se *se = &mas->se;
+ int ret;

/*
* Ensure that our interrupt handler isn't still running from some
@@ -328,27 +346,9 @@ static void setup_fifo_xfer(struct spi_transfer *xfer,

/* Speed and bits per word can be overridden per transfer */
if (xfer->speed_hz != mas->cur_speed_hz) {
- int ret;
- u32 clk_sel, m_clk_cfg;
- unsigned int idx, div;
-
- ret = get_spi_clk_cfg(xfer->speed_hz, mas, &idx, &div);
- if (ret) {
- dev_err(mas->dev, "Err setting clks:%d\n", ret);
+ ret = geni_spi_set_clock(mas, xfer->speed_hz);
+ if (ret)
return;
- }
- /*
- * SPI core clock gets configured with the requested frequency
- * or the frequency closer to the requested frequency.
- * For that reason requested frequency is stored in the
- * cur_speed_hz and referred in the consecutive transfer instead
- * of calling clk_get_rate() API.
- */
- mas->cur_speed_hz = xfer->speed_hz;
- clk_sel = idx & CLK_SEL_MSK;
- m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
- writel(clk_sel, se->base + SE_GENI_CLK_SEL);
- writel(m_clk_cfg, se->base + GENI_SER_M_CLK_CFG);
}

mas->tx_rem_bytes = 0;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2020-06-23 12:40    [W:0.089 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site