lkml.org 
[lkml]   [2020]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V8 3/8] i2c: i2c-qcom-geni: Add interconnect support
Date
Get the interconnect paths for I2C based Serial Engine device
and vote according to the bus speed of the driver.

Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
---
Changes in V2:
- As per Bjorn's comment, removed se == NULL check from geni_i2c_icc_get
- As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure
- As per Bjorn's comment, introduced and using devm_of_icc_get API for getting
path handle
- As per Matthias comment, added error handling for icc_set_bw call

Changes in V3:
- As per Matthias comment, use common library APIs defined in geni-se
driver for ICC functionality.

Changes in V4:
- Move peak_bw guess as twice of avg_bw if nothing mentioned explicitly
to ICC core.

Changes in V5:
- Use icc_enable/disable in power on/off call.

Changes in V6:
- No changes

Changes in V7:
- As per Matthias's comment removed usage of peak_bw variable because we don't
have explicit peak requirement, we were voting peak = avg and this can be
tracked using single variable for avg bw.

Changes in V8:
- No change.

drivers/i2c/busses/i2c-qcom-geni.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 18d1e4f..32b2a99 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -557,6 +557,22 @@ static int geni_i2c_probe(struct platform_device *pdev)
gi2c->adap.dev.of_node = dev->of_node;
strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));

+ ret = geni_icc_get(&gi2c->se, "qup-memory");
+ if (ret)
+ return ret;
+ /*
+ * Set the bus quota for core and cpu to a reasonable value for
+ * register access.
+ * Set quota for DDR based on bus speed.
+ */
+ gi2c->se.icc_paths[GENI_TO_CORE].avg_bw = GENI_DEFAULT_BW;
+ gi2c->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
+ gi2c->se.icc_paths[GENI_TO_DDR].avg_bw = Bps_to_icc(gi2c->clk_freq_out);
+
+ ret = geni_icc_set_bw(&gi2c->se);
+ if (ret)
+ return ret;
+
ret = geni_se_resources_on(&gi2c->se);
if (ret) {
dev_err(dev, "Error turning on resources %d\n", ret);
@@ -579,6 +595,10 @@ static int geni_i2c_probe(struct platform_device *pdev)
return ret;
}

+ ret = geni_icc_disable(&gi2c->se);
+ if (ret)
+ return ret;
+
dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);

gi2c->suspended = 1;
@@ -623,7 +643,7 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
gi2c->suspended = 1;
}

- return 0;
+ return geni_icc_disable(&gi2c->se);
}

static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
@@ -631,6 +651,10 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
int ret;
struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);

+ ret = geni_icc_enable(&gi2c->se);
+ if (ret)
+ return ret;
+
ret = geni_se_resources_on(&gi2c->se);
if (ret)
return ret;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2020-06-23 12:40    [W:0.099 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site