lkml.org 
[lkml]   [2020]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 03/11] arm64: dts: renesas: hihope-common: Separate out Rev.2.0 specific into hihope-common-rev2.dtsi file
Hi Geert,

On Tue, Jun 23, 2020 at 9:14 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Tue, Jun 23, 2020 at 9:51 AM Lad, Prabhakar
> <prabhakar.csengg@gmail.com> wrote:
> > On Mon, Jun 8, 2020 at 3:59 PM Lad, Prabhakar
> > <prabhakar.csengg@gmail.com> wrote:
> > > On Mon, Jun 8, 2020 at 3:47 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > > > On Sun, Jun 7, 2020 at 8:41 PM Lad Prabhakar
> > > > <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > > > > Separate out Rev.2.0 specific hardware changes into
> > > > > hihope-common-rev2.dtsi file so that hihope-common.dtsi can be used
> > > > > by all the variants for RZ/G2M[N] boards.
> > > > >
> > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > > > Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
>
> > > > > @@ -0,0 +1,101 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > +/*
> > > > > + * Device Tree Source for the HiHope RZ/G2[MN] main board Rev.2.0 common
> > > > > + * parts
> > > > > + *
> > > > > + * Copyright (C) 2020 Renesas Electronics Corp.
> > > > > + */
> > > > > +
> > > > > +#include <dt-bindings/gpio/gpio.h>
> > > > > +
> > > > > +/ {
> > > > > + leds {
> > > > > + compatible = "gpio-leds";
> > > > > +
> > > > > + bt_active_led {
> > > > > + label = "blue:bt";
> > > > > + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
> > > > > + linux,default-trigger = "hci0-power";
> > > > > + default-state = "off";
> > > > > + };
> > > > > +
> > > > > + led0 {
> > > > > + gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
> > > > > + };
> > > > > +
> > > > > + led1 {
> > > > > + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
> > > > > + };
> > > > > +
> > > > > + led2 {
> > > > > + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
> > > > > + };
> > > > > +
> > > > > + led3 {
> > > > > + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
> > > > > + };
> > > >
> > > > led1, led2, and led3 are present on both, so I'd keep them in
> > > > hihope-common.dtsi.
> > > >
> > > The leds defined in hihope-common-rev4.dtsi are as per the label names
> > > on the schematics/board so that it's easier to identify the LED's by
> > > name.
> > >
> > I was waiting on the above to be confirmed.
>
> I can confirm the naming of the LEDs on the rev4 board.
> However, following the same reasoning, the rev2 LEDs should be renamed
> led2201, led2202, led2203, and led2402 ;-)

I didn't want to change any behaviour if some was using the LED's with names.

> Does anyone rely on the names? If not, it may make sense to use the
> rev4 names for both, in the common file?
>
Not sure, but I'll take your suggestion and just name them as per rev4 naming.

> Not even considering the switches...
> Seems they forgot to rename switches SW220[123] when renaming LED220[123].
> Worse, on rev2, you have SW220_2_/LED220_1_ sharing a GPIO, and
> SW220_1_/LED220_2_ sharing another one.
>
> And on rev4, GP6_11/GP_LED/TSW_0_ is driving LED_4_ and SW220_2_?
>
> Conclusion: I don't care how you name them ;-)
>
:)

Cheers,
--Prabhakar

> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds

\
 
 \ /
  Last update: 2020-06-23 10:35    [W:0.061 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site